User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thunderbolt(TM) Configuration
- 6.8 PCI Subsystem Settings
- 6.9 USB Configuration
- 6.10 Network Stack Configuration
- 6.11 NVMe Configuration
- 6.12 HDD/SSD SMART Information
- 6.13 APM Configuration
- 6.14 Onboard Devices Configuration
- 6.15 Intel(R) Rapid Storage Technology
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
PRIME / ProArt / TUF GAMING Intel 600 Series BIOS Manual
55
DVMT Pre-Allocated
Allows you to select the DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used
by the Internal Graphics Device.
Configuration options: [32M] [64M] [96M] [128M] [160M] [192M] [224M] [256M] [288M]
[320M] [352M] [384M] [416M] [448M] [480M] [512M]
RC6(Render Standby)
Allows you to enable render standby support.
Configuration options: [Disabled] [Enabled]
VMD setup menu
The items in this submenu allow you to set the VMD configuration settings.
Enable VMD controller
Allows you to enable or disable the VMD controller.
Configuration options: [Disabled] [Enabled]
Setting the Enable VMD controller to [Disabled] may result in data loss.
The following items appear only when Enable VMD controller is set to [Enabled].
Map PCIE Storage under VMD
Allows you to map or unmap PCIE Storage to VMD.
Configuration options: [Disabled] [Enabled]
Ensure to set Map SATA Controller under VMD to [Disabled] if you set Map PCIE
Storage under VMD to [Enabled].
Map SATA Controller under VMD
Allows you to map or unmap this Root Port to VMD.
Configuration options: [Disabled] [Enabled]
Ensure to set Map PCIE Storage under VMD to [Disabled] if you set Map SATA
Controller under VMD to [Enabled].
PCI Express Configuration
The items in this submenu allow you to configure the PCIe Speeds for the different onboard
slots.
The items in this submenu may vary according to your motherboard. Please refer to the
BIOS of your motherboard for the actual settings and options.
M.2_1 Link Speed
Allows you to configure the M.2_1 slot.
Configuration options: [Auto] [Gen1] [Gen2] [Gen3] [Gen4]
PCIEX16_1 Link Speed
Allows you to configure the PCIEX16_1 slot.
Configuration options: [Auto] [Gen1] [Gen2] [Gen3] [Gen4] [Gen5]