User Manual

PRIME / ProArt / TUF GAMING Intel 600 Series BIOS Manual
61
The Mass Storage Devices item shows the auto-detected values. If no USB device is
detected, the item shows None.
Legacy USB Support
[Enabled] Your system supports the USB devices in legacy operating systems.
[Disabled] Your USB devices can be used for BIOS setup only and cannot be
recognized in the boot devices list.
[Auto] Your system automatically detects the presence of USB devices at startup.
If any USB devices are detected, the legacy USB support is enabled.
XHCI Hand-off
This is a workaround for OSes without XHCI hand-off support. The XHCI ownership change
should be claimed by XHCI driver.
[Disabled] Support XHCI by XHCI drivers for operating systems with XHCI support.
[Enabled] Support XHCI by BIOS for operating systems without XHCI support.
Mass Storage Devices:
Allows you to select the mass storage device emulation type for devices connected. [Auto]
enumerates devices according to their media format. Optical drives are emulated as [CD-
ROM], drives with no media will be emulated according to a drive type.
Configuration options: [Auto] [Floppy] [Forced FDD] [Hard Disk] [CD-ROM]
USB Single Port Control
Allows you to enable or disable the individual USB ports.
Refer to section Motherboard layout and Rear I/O connection in your motherboard’s
user manual for the location of the USB ports.
6.9 USB Configuration
The items in this menu allow you to change the USB-related features.