User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thunderbolt(TM) Configuration
- 6.8 PCI Subsystem Settings
- 6.9 USB Configuration
- 6.10 Network Stack Configuration
- 6.11 NVMe Configuration
- 6.12 HDD/SSD SMART Information
- 6.13 APM Configuration
- 6.14 Onboard Devices Configuration
- 6.15 Intel(R) Rapid Storage Technology
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
62
PRIME / ProArt / TUF GAMING Intel 600 Series BIOS Manual
6.10 Network Stack Configuration
The items in this menu allow you to change the Network Stack Configuration.
Network stack
Allows you to disable or enable the UEFI network stack.
Configuration options: [Disabled] [Enabled]
The following items appear only when Network Stack is set to [Enabled].
Ipv4/Ipv6 PXE Support
Allows you to enable or disable the Ipv4/Ipv6 PXE boot support.
Configuration options: [Disabled] [Enabled]
6.11 NVMe Configuration
This menu displays the NVMe controller and Drive information of the connected devices.
You may press <Enter> on a connected NVMe device which appears in this menu to view
more information on the NVMe device.
The options displayed in this menu may vary depending on the devices connected to your
motherboard. Please refer to the BIOS of your motherboard for the actual settings and
options.