User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thunderbolt(TM) Configuration
- 6.8 PCI Subsystem Settings
- 6.9 USB Configuration
- 6.10 Network Stack Configuration
- 6.11 NVMe Configuration
- 6.12 HDD/SSD SMART Information
- 6.13 APM Configuration
- 6.14 Onboard Devices Configuration
- 6.15 Intel(R) Rapid Storage Technology
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
PRIME / ProArt / TUF GAMING Intel 600 Series BIOS Manual
63
6.12 HDD/SSD SMART Information
The items in this menu allow you to view the SMART information for connected storage
devices.
Restore AC Power Loss
Allows your system to go to ON state, OFF state, or both states after an AC power loss.
When setting your system to [Last State], it goes to the previous state before the AC power
loss.
Configuration options: [Power Off] [Power On] [Last State]
Max Power Saving
Configuration options: [Disabled] [Enabled]
ErP Ready
Allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP
requirement. When set to [Enabled], all other PME options are switched off. RGB LEDs and
RGB/Addressable RGB Headers will also be disabled.
Configuration options: [Disabled] [Enabled (S4+S5)] [Enabled (S5)]
6.13 APM Configuration
The items in this menu allow you to change the advanced power management settings.
NVM Express devices do not support SMART information.