User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thunderbolt(TM) Configuration
- 6.8 PCI Subsystem Settings
- 6.9 USB Configuration
- 6.10 Network Stack Configuration
- 6.11 NVMe Configuration
- 6.12 HDD/SSD SMART Information
- 6.13 APM Configuration
- 6.14 Onboard Devices Configuration
- 6.15 Intel(R) Rapid Storage Technology
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
66
PRIME / ProArt / TUF GAMING Intel 600 Series BIOS Manual
Serial Port
Allows you to enable or disable the Serial port.
Configuration options: [Enabled] [Disabled]
The following item appears only when Serial Port is set to [Enabled].
Change settings
Allows you to select an optimal setting for super IO device.
Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4]
[IO=2E8h; IRQ=3]
6.15 Intel(R) Rapid Storage Technology
The items in this menu allow you manage RAID volumes on the Intel(R) RAID Controller.
• The settings and options of this menu may vary depending on the storage devices
connected. Please refer to the BIOS of your motherboard for the actual settings and
options.
• Ensure to set the VMD configuration settings before using Intel(R) Rapid Storage
Technology to create a RAID set.