User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thunderbolt(TM) Configuration
- 6.8 PCI Subsystem Settings
- 6.9 USB Configuration
- 6.10 Network Stack Configuration
- 6.11 NVMe Configuration
- 6.12 HDD/SSD SMART Information
- 6.13 APM Configuration
- 6.14 Onboard Devices Configuration
- 6.15 Intel(R) Rapid Storage Technology
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
70
PRIME / ProArt / TUF GAMING Intel 600 Series BIOS Manual
CPU Fan Middle. Duty Cycle (%)
Set the middle fan/pump duty cycle of the assigned fan/pump for when the source
temp. exceeds the middle temperature. We suggest raising your fan/pump duty to
100% if your CPU temperature exceeds 75°C. Please be noted CPU performance will
throttle due to overheating with inefficient fan/pump duty. Use the <+> or <-> keys to
adjust the fan/pump middle duty cycle.
CPU Fan Lower Temperature
Configure the fan/pump lower temperature to make assigned fan/pump operate at
the min. duty cycle when the source temperature is lower than the limit. We suggest
raising your fan/pump duty to 100% if your CPU temperature exceeds 75°C. Please
be noted CPU performance will throttle due to overheating with inefficient fan/pump
duty. Use the <+> or <-> keys to adjust the lower temperature.
CPU Fan Min. Duty Cycle(%)
Set the middle fan/pump duty cycle of the assigned fan/pump for when the source
temp. is lower than the lower temperature. We suggest raising your fan/pump duty to
100% if your CPU temperature exceeds 75°C. Please be noted CPU performance will
throttle due to overheating with inefficient fan/pump duty. Use the <+> or <-> keys to
adjust the fan/pump minimum duty cycle.
Chassis Fan(s) Configuration
Chassis Fan 1-5 Q-Fan Control
Allows you to set the Chassis Fan 1-5 operating mode.
[Auto Detect] Detects the type of installed fan/pump and automatically
switches the control modes.
[DC Mode] Enables the Q-Fan Control feature in DC mode for 3-pin fan/
pump.
[PWM Mode] Enables the Q-Fan Control feature in PWM mode for 4-pin fan/
pump.
Chassis Fan 1-5 Profile
Allows you to set the appropriate performance level of the assigned fan/pump. When
selecting [Manual], we suggest raising your fan/pump duty to 100% if your CPU
temperature exceeds 75°C. Please be noted CPU performance will throttle due to
overheating with inefficient fan/pump duty.
Configuration options: [Standard] [Silent] [Turbo] [Full Speed] [Manual]
The following items appear only when CPU Fan 1-5 Profile is set to [Standard], [Silent],
[Turbo], or [Manual].
Chassis Fan 1-5 Q-Fan Source
The assigned fan/pump will be controlled according to the selected temperature source.
Configuration options: [CPU] [MotherBoard] [VRM] [Chipset] [T_Sensor] [Multiple
Sources]
For Multiple Sources, select up to three temperature sources and the fan will automatically
change based on the highest temperature.