User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thunderbolt(TM) Configuration
- 6.8 PCI Subsystem Settings
- 6.9 USB Configuration
- 6.10 Network Stack Configuration
- 6.11 NVMe Configuration
- 6.12 HDD/SSD SMART Information
- 6.13 APM Configuration
- 6.14 Onboard Devices Configuration
- 6.15 Intel(R) Rapid Storage Technology
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
72
PRIME / ProArt / TUF GAMING Intel 600 Series BIOS Manual
Chassis Fan 1-5 Min. Duty Cycle(%)
Set the middle fan/pump duty cycle of the assigned fan/pump for when the source temp.
is lower than the lower temperature. We suggest raising your fan/pump duty to 100% if
your CPU temperature exceeds 75°C. Please be noted CPU performance will throttle due
to overheating with inefficient fan/pump duty. Use the <+> or <-> keys to adjust the fan/
pump minimum duty cycle.
Allow Fan Stop
This function allows the fan to run at 0% duty cycle when the temperature of the source is
dropped below the lower temperature.
Configuration options: [Disabled] [Enabled]
AIO Pump Q-Fan Control
Allows you to set the AIO Pump operating mode.
[Auto Detect] Detects the type of installed fan/pump and automatically switches
the control modes.
[DC Mode] Enables the Q-Fan Control feature in DC mode for 3-pin fan/pump.
[PWM Mode] Enables the Q-Fan Control feature in PWM mode for 4-pin fan/
pump.
AIO Pump Profile
Allows you to set the appropriate performance level of the assigned fan/pump. When
selecting [Manual], we suggest raising your fan/pump duty to 100% if your CPU
temperature exceeds 75°C. Please be noted CPU performance will throttle due to
overheating with inefficient fan/pump duty.
Configuration options: [Standard] [Silent] [Turbo] [Full Speed] [Manual]
The following items appear only when AIO Pump Profile is set to [Standard], [Silent],
[Turbo], or [Manual].
AIO Pump Q-Fan Source
The assigned fan/pump will be controlled according to the selected temperature
source.
Configuration options: [CPU] [MotherBoard] [VRM] [Chipset] [T_Sensor] [Multiple
Sources]
AIO Pump Step Up
Step up allows you to adjust how quickly the fan rotation speed changes, with level 0
being an instantaneous change in speed. The higher the level, the slower the change
in speed, and may also result in less noise, but this will also cause slower heat
dissipation.
Configuration options: [Level 0] [Level 1] [Level 2] [Level 3] [Level 4] [Level 5]
AIO Pump Step Down
Step down allows you to adjust how quickly the fan rotation speed changes, with
level 0 being an instantaneous change in speed. The higher the level, the slower the
change in speed, and may also result in less noise, but this will also cause slower
heat dissipation.
Configuration options: [Level 0] [Level 1] [Level 2] [Level 3] [Level 4] [Level 5]