User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thunderbolt(TM) Configuration
- 6.8 PCI Subsystem Settings
- 6.9 USB Configuration
- 6.10 Network Stack Configuration
- 6.11 NVMe Configuration
- 6.12 HDD/SSD SMART Information
- 6.13 APM Configuration
- 6.14 Onboard Devices Configuration
- 6.15 Intel(R) Rapid Storage Technology
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
PRIME / ProArt / TUF GAMING Intel 600 Series BIOS Manual
81
9. Tool menu
The Tool menu items allow you to configure options for special functions. Select an item
then press <Enter> to display the submenu.
BIOS Image Rollback Support
[Enabled] Support roll back your BIOS to a previous version, but this setting violates
the NIST SP 800-147 requirement.
[Disabled] Only support updating your BIOS to a newer version, and this setting
meets the NIST SP 800-147 requirement.
Publish HII Resources
Configuration options: [Disabled] [Enabled]
Flexkey
[Reset] Reboots the system.
[Aura On/Off] Enable or Disable Aura LEDs. This setting does not sync with the BIOS/
software option.
[DirectKey] Boot directly into the BIOS.
Setup Animator
Allows you to enable or disable the Setup animator.
Configuration options: [Disabled] [Enabled]