User Manual
Table Of Contents
- 目录
- 1. 认识 BIOS 程序
- 2. BIOS 设置程序
- 3. 我的最爱(My Favorites)
- 4. 主菜单(Main Menu)
- 5. Ai Tweaker 菜单(Ai Tweaker menu)
- 6. 高级菜单(Advanced menu)
- 6.1 平台各项设置(Platform Misc Configuration)
- 6.2 处理器设置(CPU Configuration)
- 6.3 系统代理设置(System Agent Configuration)
- 6.4 PCH 设置(PCH Configuration)
- 6.5 PCH 存储设备设置(PCH Storage Configuration)
- 6.6 PCH-FW 设置(PCH-FW Configuration)
- 6.7 Thunderbolt(TM) 设置
- 6.8 PCI 子系统设置(PCI Subsystem Settings)
- 6.9 USB 设备设置(USB Configuration)
- 6.10 网络协定堆栈设置(Network Stack Configuration)
- 6.11 NVMe 设置(NVMe Configuration)
- 6.12 HDD/SSD SMART 信息
- 6.13 高级电源管理设置(APM Configuration)
- 6.14 内置设备设置(OnBoard Devices Configuration)
- 6.15 Intel® 快速保存技术(Intel(R) Rapid Storage Technology)
- 7. 监控菜单(Monitor menu)
- 8. 启动菜单(Boot menu)
- 9. 工具菜单(Tools menu)
- 10. 退出 BIOS 程序(Exit menu)
- 11. 更新 BIOS 程序(Updating BIOS)
28
PRIME / ProArt / TUF GAMING Intel 600 系列 BIOS 用戶手冊
DIMM DFE Training
設置值:[Auto] [Disabled] [Enabled]
Tx Dqs Dcc Training
設置值:[Auto] [Disabled] [Enabled]
Rank Margin Tool
設置值:[Auto] [Disabled] [Enabled]
Memory Test
設置值:[Auto] [Disabled] [Enabled]
DIMM SPD Alias Test
設置值:[Auto] [Disabled] [Enabled]
Receive Enable Centering 1D
設置值:[Auto] [Disabled] [Enabled]
Retrain Margin Check
設置值:[Auto] [Disabled] [Enabled]
Write Drive Strength Up/Dn independently
設置值:[Auto] [Disabled] [Enabled]
Margin Check Limit
設置值:[Disabled] [L1] [L2] [Both]
以下項目當 Margin Check Limit 設置為 [L2] 或 [Both] 時才會出現。
Margin Limit Check L2
設置值:[1] - [300]
ThirdTimings
tRDRD_sg_Training
設置值:[Auto] [0] - [127]
tRDRD_sg_Runtime
設置值:[Auto] [0] - [127]
tRDRD_dg_Training
設置值:[Auto] [0] - [127]
tRDRD_dg_Runtime
設置值:[Auto] [0] - [127]
tRDWR_sg
設置值:[Auto] [0] - [255]
tRDWR_dg
設置值:[Auto] [0] - [255]
tWRWR_sg
設置值:[Auto] [0] - [127]
tWRWR_dg
設置值:[Auto] [0] - [127]
tWRRD_sg
設置值:[Auto] [0] - [511]