User's Manual
ASUS PRIME X399-A
3-15
Chapter 3
Intel LAN Controller
This item allows you to enable or disable the Intel LAN controllers. Conguration options:
[Disabled] [Enabled]
3.6.5 APM Conguration
The items in this menu allow you to set system wake and sleep settings.
ErP Ready
This item allows you to switch off some power at S4+S5 or S5 to get the system ready
for ErP requirement. When set to [Enabled], all other PME options are switched off.
Conguration options: [Disabled] [Enable(S4+S5)] [Enable(S5)]
Restore On AC Power Loss
This item allows your system to go to ON state, OFF state, or both states after an AC power
loss. When setting your system to [Last State], it goes to the previous state before the AC
power loss. Conguration options: [Power On] [Power Off] [Last State]
Power On By PCI-E
This item allows you to enable or disable the Wake-on-LAN function of the onboard LAN
controller or other installed PCI-E LAN cards. Conguration options: [Disabled] [Enabled]
Power On By RTC
This item allows you to enable or disable the RTC (Real-Time Clock) to generate a wake
event and congure the RTC alarm date. When enabled, you can set the days, hours,
minutes, or seconds to schedule an RTC alarm date. Conguration options: [Disabled]
[Enabled]
NX Mode
This item allows you enable or disable no-execute page protection function. Conguration
options: [Disabled] [Enabled]
SVM Mode
This item allows you enable or disable CPU Virtualization. Conguration options: [Disabled]
[Enabled]
3.6.7 Network Stack Conguration
The items in this menu allow you to enable or disable the UEFI network stack
3.6.6 CPU Conguration
The items in this menu show the CPU-related information that the BIOS automatically
detects.
The items in this menu may vary based on the CPU installed.
3.6.8 HDD/SSD SMART Information
This menu displays the SMART information of the connected devices.
NVM Express devices do not support SMART information.