User Manual
PRIME/PRO/TUF GAMING X570 Series BIOS Manual
21
DIGI+ VRM
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
VDDCR CPU Load-line Calibration
Load-line affects CPU power voltage. The CPU working voltage decreases
proportionally to CPU loading. Higher load-line calibration could get higher voltage and
good overclocking performance, but increases the CPU and VRM thermal conditions.
Select from levels 1 to 7 to adjust the load-line slope.
Conguration options [Auto] [Default] [Level 1] - [Level 7]
The actual performance boost may vary depending on your CPU specication.
DO NOT remove the thermal module. The thermal conditions should be monitored.
VDDCR CPU Current Capability
This item allows you to set the shut off current limit for external voltage regulator. A
higher setting will allow the voltage regulator to supply more current while a lower
setting will cause the voltage regulator to shut off the system when the supplied current
is higher than the set value.
Conguration options: [100%] [110%] [120%] [130%]
Congure higher values when overclocking or under a high CPU loading for extra power
support.
VDDCR CPU Switching Frequency
This item allows you to set a higher frequency for a quicker transient response speed.
Use the <+> or <-> to adjust the value. The values range from 200 to 350 with an
interval of 50.
DO NOT remove the thermal module. The thermal conditions should be monitored.
VDDCR CPU Power Phase Control
This item allows you to set the power phase control of the CPU.
[Manual] Phase number is adjusted by current(A) step.
[Optimized] Set to the ASUS optimized phase tuning prole.
[Extreme] Set to the full phase mode.
The following item appears only when the VDDCR CPU Power Phase Control is set to
[Manual].