User Manual

ASUS PRIME X570-PRO
1-17
Chapter 1
9. CPU, CPU optional, and chassis fan connectors; water pump+, and AIO pump
connectors (4-pin CPU_FAN, 4-pin CPU_OPT, 4-pin CHA_FAN1-3; 4-pin W_
PUMP+, 4-pin AIO_PUMP)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
• DO NOT forget to connect the fan cables to the fan connectors. Insufcient air ow
inside the system may damage the motherboard components. These are not jumpers!
Do not place jumper caps on the fan connectors!
• Ensure to fully insert the 4-pin CPU fan cable to the CPU fan connector.
• Connect the pump cable from the all-in-one cooler (AIO cooler) to the AIO_PUMP
header, and connect the fan cables to the CPU_FAN and/or CPU_OPT header(s).
• W_PUMP+ function support depends on water cooling device.
Header Max. Current Max. Power Default Speed Shared Control
CPU_FAN 1A 12W Q-Fan Controlled A
CPU_OPT 1A 12W Q-Fan Controlled A
CHA_FAN1 1A 12W Q-Fan Controlled -
CHA_FAN2 1A 12W Q-Fan Controlled -
CHA_FAN3 1A 12W Q-Fan Controlled -
AIO_PUMP 1A 12W Full Speed B
W_PUMP+ 3A 36W Full Speed B
A
B
C
D
E
F
G
E
CPU_FAN
A
CPU FAN PWM
CPU FAN IN
CPU FAN PWR
GND
AIO_PUMP
AIO PUMP PWM
AIO PUMP IN
AIO PUMP PWR
GND
CHA_FAN3CHA_FAN1
D
CHA_FAN2
GND CHA FAN PWR CHA FAN IN CHA FAN PWM GND CHA FAN PWR CHA FAN IN CHA FAN PWM
GND PUMP PWR PUMP IN PUMP PWM
CPU_OPT
C
CPU FAN PWM
CPU FAN IN
CPU FAN PWR
GND
F
B
CHA FAN PWM
CHA FAN IN
CHA FAN PWR
GND
G
W_PUMP+
PRIME X570-PRO Fan connectors