User Manual

E18262
15060-0YNR0000
Motherboard Technical Updates
This is an information update for the user guide that comes with your motherboard package.
The updates to the FCC Compliance information and Wi-Fi label will be as detailed in the table below.
Previously Currently
Identication of the assembled product: INTEL
®
WI-FI
6 AX200
Identication of the assembled product: INTEL
®
WI-FI
6 AX201
Model Name: INTEL
®
WI-FI 6 AX200 Model Name: INTEL
®
WI-FI 6 AX201
FCC ID: PD9AX200NG FCC ID: PD9AX201NG
Function Frequency Maximum Output Power (EIRP)
WiFi
2412 - 2472 MHz 18.269dBm
5150 - 5350 MHz 19.918 dBm
5470 - 5725 MHz 20.098 dBm
5725 - 5850 MHz 11.095 dBm
Bluetooth 2402 - 2480 MHz 12.889 dBm
Function Frequency Maximum Output Power (EIRP)
WiFi
2412 - 2472 MHz 18.92 dBm
5150 - 5350 MHz 20.08 dBm
5470 - 5725 MHz 20.51 dBm
5725 - 5850 MHz 11.02 dBm
Bluetooth 2402 - 2480 MHz 11.68 dBm
You can nd the updated FCC Compliance information below.
FCC Compliance Information
Responsible Party: Asus Computer International
Address: 48720 Kato Rd., Fremont, CA 94538, USA
Phone / Fax No: [phone] / [phone]
Identification of the assembled product: INTEL
®
WI-FI 6 AX201
Identication of the modular components used in the assembly:
Model Name: INTEL
®
WI-FI 6 AX201 FCC ID: PD9AX201NG
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.