E18811_PRIME_Z690-P_UM.
E18811 First Edition August 2021 Copyright © 2021 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Safety information....................................................................................................... iv About this guide........................................................................................................... v PRIME Z690-P specifications summary.................................................................... vi Package contents.........................................................................................................
Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
About this guide This user guide contains the information you need when installing and configuring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product Introduction This chapter describes the features of the motherboard and the new technology it supports. It includes description of the switches, jumpers, and connectors on the motherboard.
PRIME Z690-P specifications summary Intel® Socket LGA1700 for 12th Gen Intel® Core™, Pentium® Gold and Celeron® Processors* CPU Supports Intel® Turbo Boost Technology 2.0 and Intel® Turbo Boost Max Technology 3.0** * Refer to www.asus.com for CPU support list. ** Intel® Turbo Boost Max Technology 3.0 support depends on the CPU types. Chipset Intel® Z690 Chipset 4 x DIMM, Max.
PRIME Z690-P specifications summary Ethernet Wireless & Bluetooth 1 x Realtek 2.5Gb Ethernet V-M.2 slot only (Key E, CNVi & PCIe)* * Wi-Fi module and vertical M.2 Key E bracket set are purchased separately. Rear USB (Total 6 ports) 1 x USB 3.2 Gen 2x2 port (1 x USB Type-C®) 1 x USB 3.2 Gen 2 port (1 x Type-A) 2 x USB 3.2 Gen 1 ports (2 x Type-A) USB 2 x USB 2.0 ports (2 x Type-A) Front USB (Total 9 ports) 1 x USB 3.2 Gen 1 connector (supports USB Type-C®) 2 x USB 3.
PRIME Z690-P specifications summary Fan and Cooling related 1 x 4-pin CPU Fan header 1 x 4-pin CPU OPT Fan header 1 x 4-pin AIO Pump header 3 x 4-pin Chassis Fan headers Power related 1 x 24-pin Main Power connector 1 x 8-pin +12V Power connector 1 x 4-pin +12V Power connector Storage related 3 x M.2 slots (Key M) 4 x SATA 6Gb/s ports Internal I/O Connectors USB 1 x USB 3.2 Gen 1 connector (supports USB Type-C®) 2 x USB 3.2 Gen 1 headers support additional 4 USB 3.2 Gen 1 ports 2 x USB 2.
PRIME Z690-P specifications summary ASUS Exclusive Software Features Armoury Crate - AURA Sync - Fan Xpert 4 AI Suite 3 - Performance And Power Saving Utility TurboV EVO EPU Software Features DIGI+ VRM ASUS CPU-Z Norton Anti-virus software (Free Trial version) WinRAR UEFI BIOS ASUS EZ DIY - ASUS CrashFree BIOS 3 - ASUS EZ Flash 3 - ASUS UEFI BIOS EZ Mode BIOS 192 (128+64) Mb Flash ROM, UEFI AMI BIOS Manageability WOL by PME, PXE Operating System Windows® 11 64-bit, Windows® 10 64-bit Form Factor AT
Package contents Check your motherboard package for the following items. Motherboard 1 x PRIME Z690-P motherboard Cables 2 x SATA 6Gb/s cables 1 x I/O Shield Miscellaneous 1 x M.2 Rubber Package 2 x M.2 SSD screw packages Installation Media 1 x Support DVD Documentation 1 x User guide If any of the above items is damaged or missing, contact your retailer. x E18811_PRIME_Z690-P_UM.
Installation tools and components Phillips (cross) screwdriver PC chassis Power supply unit Intel® LGA 1700 CPU Intel® LGA 1700 compatible CPU Fan DDR5 DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card (optional) M.2 SSD module (optional) 1 Bag of screws The tools and components in the table above are not included in the motherboard package. xi E18811_PRIME_Z690-P_UM.
E18811_PRIME_Z690-P_UM.
Product Introduction Product Introduction 1.1 Before you proceed 1 Chapter 1 Chapter 1: Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
Motherboard layout 5 4 1 23.4cm(9.2in) 4 2 RGB_HEADER1 Chapter 1 CPU_FAN CPU_OPT KBMS_USB1112 ATX_12V_2 ATX_12V_1 DIGI+ VRM ASM 1442K LGA1700 AUDIO CHA_FAN1 ADD_GEN 2_1 M.2(WIFI) SATA X IRST V AIO_PUMP 2260 2242 Ethernet 4 5 U32_4 PCIE 4.0 X4 M.2_1(SOCKET3) M.
PRIME Z690-P E18811_PRIME_Z690-P_UM.indb 3 Page 1-4 1-5 1-7 1-8 1-9 1-10 1-11 1-12 1-12 1-13 1-14 1-15 1-16 1-17 1-17 1-18 1-18 1-19 1-20 Chapter 1 Layout contents 1. CPU socket 2. DIMM slots 3. Expansion slots 4. Fan and Pump headers 5. Power connectors 6. M.2 slots (SOCKET 3) 7. SATA 6Gb/s ports 8. USB 3.2 Gen 1 Type-C® Front Panel connector 9. USB 3.2 Gen 1 headers 10. USB 2.0 headers 11. Addressable Gen 2 headers 12. AURA RGB headers 13. Clear CMOS header 14. COM Port header 15.
1. CPU socket The motherboard comes with a LGA1700 socket designed for 12th Gen Intel® Core™, Pentium® Gold and Celeron® Processors. Chapter 1 LGA1700 • Ensure that you install the correct CPU designed for LGA1700 socket only. DO NOT install a CPU designed for other sockets on the LGA1700 socket. • The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU.
2. DIMM slots The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed for DDR5 (Double Data Rate 5) memory modules. Chapter 1 DIMM_B2 DIMM_B1 DIMM_A2 DIMM_A1 A DDR5 memory module is notched differently from a DDR, DDR2, DDR3 or DDR4 module. DO NOT install a DDR, DDR2, DDR3 or DDR4 memory module to the DDR5 slot. Recommended memory configurations DIMM_A2 DIMM_A2 DIMM_B2 PRIME Z690-P E18811_PRIME_Z690-P_UM.
Memory configurations You may install 8 GB, 16 GB, and 32 GB unbuffered and non‑ECC DDR5 DIMMs into the DIMM sockets. Chapter 1 You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation.
3. Expansion slots Chapter 1 Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. 1 PCIEX16(G5) 2 PCIEX16(G3)_1 3 PCIEX16(G4) PCIEX1(G3) 4 PCIEX16(G3)_2 Please refer to the following tables for the recommended VGA configuration. Recommended VGA configuration Slot Description 1. PCIe 5.0/4.0/3.0 x16 Single VGA Dual VGA Triple VGA x16 x16 x16 2. PCIe 3.0 x16_1 - - - 3. PCIe 4.0/3.
4. Fan and Pump headers D C E F C AIO_PUMP D CHA_FAN1 E CHA_FAN2 F CHA_FAN3 GND CPU_FAN CPU_OPT FAN PWM FAN IN FAN PWR GND FAN PWR FAN IN FAN PWM Chapter 1 B GND A A B FAN PWM FAN IN FAN PWR The Fan and Pump headers allow you to connect fans or pumps to cool the system. • DO NOT forget to connect the fan cables to the fan headers. Insufficient air flow inside the system may damage the motherboard components.
5. Power connectors ATX_12V_2 +DC_IN +DC_IN B B ATX_12V_1 +12V DC +12V DC +12V DC +12V DC A PIN 1 PIN 1 GND GND C GND GND GND GND A C Chapter 1 These Power connectors allow you to connect your motherboard to a power supply. The power supply plugs are designed to fit in only one orientation. Find the proper orientation and push down firmly until the power supply plugs are fully inserted.
6. M.2 slots The M.2 slots allow you to install M.2 devices such as M.2 SSD modules. Chapter 1 A A M.2_1(SOCKET3) B M.2_2(SOCKET3) C M.2_3(SOCKET3) B C • Intel® 12th Gen processors: M.2_1 slot (Key M), type 2242/2260/2280/22110 - Intel® 12th Gen processors support PCIe 4.0 x4 mode. • Intel® Z690 Chipset: M.2_2 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode) M.2_3 slot (Key M), type 2242/2260/2280/22110 (supports PCIe 4.
7. SATA 6Gb/s ports Chapter 1 The SATA 6Gb/s ports allow you to connect SATA devices such as optical disc drives and hard disk drives via a SATA cable. A GND RSATA_TXP RSATA_TXN GND RSATA_RXN RSATA_RXP GND SATA6G_1 SATA6G_2 B A B GND RSATA_RXP RSATA_RXN GND RSATA_TXN RSATA_TXP GND SATA6G_3 SATA6G_4 If you installed SATA storage devices, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® Z690 chipset.
8. USB 3.2 Gen 1 Type-C® Front Panel connector The USB 3.2 Gen 1 Type-C® connector allows you to connect a USB 3.2 Gen 1 Type-C® module for an additional USB 3.2 Gen 1 Type-C® port on the front panel. The USB 3.2 Gen 1 Type-C® connector provides data transfer speeds of up to 5 Gb/s. Chapter 1 U32_4 The USB 3.2 Gen 1 Type-C® module is purchased separately. 9. USB 3.2 Gen 1 headers The USB 3.2 Gen 1 headers allow you to connect USB 3.2 Gen 1 modules for additional USB 3.2 Gen 1 ports. The USB 3.
10. USB 2.0 headers Chapter 1 The USB 2.0 headers allow you to connect a USB module for additional USB 2.0 ports. The USB 2.0 headers provide data transfer speeds of up to 480 Mb/s. A USB_E12 USB_E34 PIN 1 A B USB+5V USB_P2USB_P2+ GND USB+5V USB_P1USB_P1+ GND NC B DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! The USB 2.0 module is purchased separately. PRIME Z690-P E18811_PRIME_Z690-P_UM.
11. Addressable Gen 2 headers The Addressable Gen 2 headers allow you to connect individually addressable RGB WS2812B LED strips or WS2812B based LED strips. Chapter 1 A A B C ADD_GEN 2_1 ADD_GEN 2_3 ADD_GEN 2_2 Ground Data +5V PIN 1 B C The Addressable Gen 2 headers support WS2812B addressable RGB LED strips (5V/ Data/Ground), with a maximum power rating of 3A (5V) and the addressable headers on this board can handle a combined maximum of 500 LEDs.
12. AURA RGB headers A A B Chapter 1 The AURA RGB headers allow you to connect RGB LED strips. RGB_HEADER1 RGB_HEADER2 B R G +12V PIN 1 B The RGB header supports 5050 RGB multi-color LED strips (12V/G/R/B), with a maximum power rating of 3A (12V). Before you install or remove any component, ensure that the power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components.
13. Clear CMOS header The Clear CMOS header allows you to clear the Real Time Clock (RTC) RAM in the CMOS, which contains the date, time, system passwords, and system setup parameters. Chapter 1 +3V_BAT GND CLRTC PIN 1 To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2. Use a metal object such as a screwdriver to short the two pins. 3. Plug the power cord and turn on the computer. 4. Hold down the key during the boot process and enter BIOS setup to reenter data.
14. COM Port header Chapter 1 The COM (Serial) Port header allows you to connect a COM port module. Connect the COM port module cable to this header, then install the module to a slot opening on the system chassis. PIN 1 DCD TXD GND RTS RI RXD DTR DSR CTS COM The COM port module is purchased separately. 15. Front Panel Audio header SENSE2_RETUR AGND NC SENSE1_RETUR The front panel audio header is for a chassis-mounted front panel audio I/O module that supports HD Audio.
16. V-M.2 slot (Key E) The vertical M.2 slot (Key E) allows you to install an M.2 Wi-Fi module. Chapter 1 M.2(WIFI) The M.2 Wi-Fi module and vertical M.2 Key E bracket set are purchased separately. 17. SPI TPM header (14-1pin) This header supports a Trusted Platform Module (TPM) system with a Serial Peripheral Interface (SPI), allowing you to securely store keys, digital certificates, passwords, and data.
18. System Panel header Chapter 1 The System Panel header supports several chassis-mounted functions. +5V Ground Ground Speaker PLED+ PLEDPWRBTN# GND PLED PWRSW SPEAKER PANEL PLED- HDD_LED+ HDD_LEDGround RSTCON# NC PLED+ PIN 1 HDD_LED RESET PLED • System Power LED header (PLED) The 2-pin and/or 3-1 pin headers allow you to connect the System Power LED.
19. ThunderboltTM header The Thunderbolt™ header allows you to connect an add-on Thunderbolt™ I/O card that supports Intel®’s Thunderbolt™ Technology, allowing you to connect Thunderbolt™-enabled devices to form a daisy chain-configuration. I2C_SCL I2C_SDA I2C_IRQ# RTD3_POWER_EN S_SLP_S0#_IDLE PERST_N WAKE# Chapter 1 TB_HEADER RTD3_SW FORCE_PWR TB_CIO_PLUG_EVENT SLP_S3# SLP_S5# GND PIN 1 • The add-on Thunderbolt™ I/O card and Thunderbolt™ cables are purchased separately.
Chapter 2: Basic Installation Basic Installation 2.1 Building your PC system 2 The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps are the same for all models. CPU installation • Ensure that you install the correct CPU designed for LGA1700 socket only. DO NOT install a CPU designed for LGA1155, LGA1156, LGA1151, and LGA1200 sockets on the LGA1700 socket.
Chapter 2 2-2 E18811_PRIME_Z690-P_UM.
2.1.2 Cooling system installation • Apply Thermal Interface Material to the CPU cooling system and CPU before you install the cooling system, if necessary. Chapter 2 To install a CPU heatsink and fan assembly PRIME Z690-P E18811_PRIME_Z690-P_UM.
• We recommend using a LGA1700 compatible cooling system on an Intel® 600 series motherboard. • Additional holes for LGA1200 compatible cooling systems are also available on ASUS’ Intel® 600 series motherboards, however, we still strongly advise consulting with your cooling system vendor or manufacturer on the compatibility and functionality of the cooling system. • Push-pin type LGA1200 compatible cooling systems cannot be installed to this motherboard.
To install an AIO cooler We recommend using a LGA1700 compatible cooling system on an Intel® 600 series motherboard. • Additional holes for LGA1200 compatible cooling systems are also available on ASUS’ Intel® 600 series motherboards, however, we still strongly advise consulting with your cooling system vendor or manufacturer on the compatibility and functionality of the cooling system.
2.1.3 DIMM installation Chapter 2 To remove a DIMM 2-6 E18811_PRIME_Z690-P_UM.
2.1.4 M.2 installation To install an M.2 SSD card 1 1 Chapter 2 2 OPTIONAL 3 3 3 • Ensure to install the bundled M.2 rubber pad before installing your single sided M.2 storage device. • DO NOT install the bundled M.2 rubber pads when installing a double-sided M.2 storage device. The rubber pad installed by default is compatible with double sided M.2 storage devices. PRIME Z690-P E18811_PRIME_Z690-P_UM.
5 5 4 4 5 4 Chapter 2 8 6 7 8 • The M.2 heatsink can be installed to the M.2_1 slot or to the M.2_3 slot. • The M.2 SSD module is purchased separately. 2-8 E18811_PRIME_Z690-P_UM.
2.1.5 1. Motherboard installation Install the ASUS I/O Shield to the chassis rear I/O panel. Chapter 2 Some sharp edges and points might cause physical injury. We recommend you put on cut or puncture resistant gloves before motherboard and I/O shield installation. 2. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis’ rear I/O panel. PRIME Z690-P E18811_PRIME_Z690-P_UM.
3. Place six (6) screws into the holes indicated by circles to secure the motherboard to the chassis. Chapter 2 DO NOT over tighten the screws! Doing so can damage the motherboard. 2-10 E18811_PRIME_Z690-P_UM.
ATX power connection Chapter 2 2.1.6 OR AND Ensure to connect the 8-pin power plug. PRIME Z690-P E18811_PRIME_Z690-P_UM.
2.1.7 SATA device connection OR Chapter 2 2-12 E18811_PRIME_Z690-P_UM.
2.1.8 Front I/O connector To install front panel connector To install USB 3.2 Gen 1 Type-C® connector USB 3.2 Gen 1 Type-C® To install USB 3.2 Gen 1 connector Chapter 2 This connector will only fit in one orientation. Push the connector until it clicks into place. To install USB 2.0 connector USB 2.0 USB 3.2 Gen 1 To install front panel audio connector AAFP PRIME Z690-P E18811_PRIME_Z690-P_UM.
2.1.9 Expansion card installation To install PCIe x16 cards Chapter 2 To install PCIe x1 cards 2-14 E18811_PRIME_Z690-P_UM.
To install Thunderbolt™ series card 6-pin PCIe power connector USB Type-C® port connects to Thunderbolt devices Chapter 2 MiniDP in port connects to DP out port on the motherboard or a VGA card USB 2.0 header Thunderbolt™ header The Thunderbolt™ card can only be used when installed to the PCIEX16(G3)_2 slot. Ensure to install your Thunderbolt™ card to the PCIEX16(G3)_2 slot.
2.2 Motherboard rear and audio connections 2.2.1 Rear I/O connection 1 2 3 4 5 6 7 8 9 10 Chapter 2 Rear panel connectors 1. 2. 3. 4. 5. 6. 7. 8. PS/2 Keyboard/Mouse combo port DisplayPort USB 3.2 Gen 2 Type-A port 3 Ethernet port* USB 2.0 ports 11 and 12 HDMI® port USB 3.2 Gen 2x2 Type-C® port 1 USB 3.2 Gen 1 Type-A ports 9 and 10 9. Optical S/PDIF OUT port 10. Audio Jacks** * and ** : Refer to the tables on the next page for LAN port LEDs, and audio port definitions.
* Ethernet port LED indications Activity Link LED Speed LED Status Description Status Description OFF No link OFF No link GREEN Linked GREEN 2.5 Gbps connection BLINKING Data activity ORANGE 1 Gbps / 100 Mbps / 10 Mbps connection ACT/LINK LED SPEED LED Ethernet port 4-channel 5.1-channel 7.
Connect to Stereo Speakers Connect to 2-channel Speakers Chapter 2 Connect to 4-channel Speakers 2-18 E18811_PRIME_Z690-P_UM.
Chapter 2 Connect to 5.1-channel Speakers Connect to 7.1-channel Speakers PRIME Z690-P E18811_PRIME_Z690-P_UM.
2.3 Starting up for the first time 1. After making all the connections, replace the system case cover. 2. Ensure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis. 4. Connect the power cord to a power outlet that is equipped with a surge protector. 5. Turn on the devices in the following order: 6. a. Monitor b. External storage devices (starting with the last device on the chain) c.
Chapter 3: BIOS and RAID Support BIOS and RAID Support 3.1 Knowing BIOS 3 The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboardonly BIOS controls to enable a more flexible and convenient mouse input. You can easily navigate the new UEFI BIOS with the same smoothness as your operating system. The term “BIOS” in this user manual refers to “UEFI BIOS” unless otherwise specified.
3.2 BIOS Setup program Use the BIOS Setup to update the BIOS or configure its parameters. The BIOS screens include navigation keys and brief onscreen help to guide you in using the BIOS Setup program. Entering BIOS at startup To enter BIOS Setup at startup, press or during the Power-On Self Test (POST). If you do not press or , POST continues with its routines. Entering BIOS Setup after POST To enter BIOS Setup after POST: • Press ++ simultaneously.
3.3 ASUS EZ Flash 3 The ASUS EZ Flash 3 feature allows you to update the BIOS without using an OS‑based utility. Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu or press hotkey . To update the BIOS: • This function can support devices such as a USB flash disk with FAT 32/16 format and single partition only.
3.4 ASUS CrashFree BIOS 3 The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS file using a USB flash drive that contains the BIOS file. Recovering the BIOS 1. Download the latest BIOS version for this motherboard from https://www.asus.com/support/. 2. Rename the BIOS file as ASUS.CAP or PZ690P5.CAP and copy the renamed BIOS file to a USB flash drive. 3.
3.5 RAID configurations The motherboard comes with the Intel® Rapid Storage Technology that supports RAID 0, RAID 1, RAID 5 and RAID 10 configuration. For more information on configuring your RAID sets, please refer to the RAID Configuration Guide which you can find at https://www.asus.com/support, or by scanning the QR code. RAID definitions RAID 0 (Data striping) optimizes two identical hard disk drives to read and write data in parallel, interleaved stacks.
Chapter 3 3-6 E18811_PRIME_Z690-P_UM.
Appendix Appendix Notices FCC Compliance Information Responsible Party: Address: Phone / Fax No: Asus Computer International 48720 Kato Rd., Fremont, CA 94538, USA (510)739-3777 / (510)608-4555 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Google™ License Terms Copyright© 2021 Google Inc. All Rights Reserved. Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at: http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions. DO NOT throw the motherboard in municipal waste.
English ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at: www.asus.com/support Français AsusTek Computer Inc. déclare par la présente que cet appareil est conforme aux critères essentiels et autres clauses pertinentes des directives concernées. La déclaration de conformité de l’UE peut être téléchargée à partir du site Internet suivant : www.
Warranty EN: ASUS Guarantee Information • ASUS offers a voluntary manufacturer’s Commercial Guarantee. • ASUS reserves the right to interpret the provisions of the ASUS Commercial Guarantee. • This ASUS Commercial Guarantee is provided independently and in addition to the statutory Legal Guarantee and in no way affects or limits the rights under the Legal Guarantee. CR: Informacije o ASUS jamstvu • ASUS dragovoljno nudi komercijalno proizvođačko jamstvo.
PRIME Z690-P E18811_PRIME_Z690-P_UM.indb 7 SW: ASUS garantiinformation • ASUS erbjuder en frivillig kommersiell tillverkningsgaranti. • ASUS förbehåller sig rätten att tolka bestämmelserna i ASUS kommersiella garanti. • Denna kommersiella garanti från ASUS tillhandahålles separat och som tillägg till den lagstadgade garantin, och påverkar eller begränsar på intet sätts rättigheterna under den lagstadgade garantin. För all garantiinformation, besök https://www.asus.com/se/support/.
ASUS contact information ASUSTeK COMPUTER INC. Address: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan ASUS COMPUTER INTERNATIONAL (America) Address: 48720 Kato Rd., Fremont, CA 94538, USA ASUS COMPUTER GmbH (Germany and Austria) Address: Harkortstrasse 21-23, 40880 Ratingen, Germany ASUSTeK (UK) LIMITED Address: 1 st Floor, Sackville House, 143-149 Fenchurch Street, London, EC3M 6BL, England, United Kingdom Service and Support Visit our multi-language website at https://www.asus.
