Motherboard PRIME Z790-V AX
E22853 First Edition November 2023 Copyright © 2023 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Safety information ������������������������������������������������������������������������������������������������������������iv About this guide ����������������������������������������������������������������������������������������������������������������v PRIME Z790-V AX specifications summary �������������������������������������������������������������������vi Package contents ��������������������������������������������������������������������������������������������������������������x Cha
Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
About this guide This user guide contains the information you need when installing and configuring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product Introduction This chapter describes the features of the motherboard and the new technology it supports. It includes description of the switches, jumpers, and connectors on the motherboard.
PRIME Z790-V AX specifications summary Intel® Socket LGA1700 for Intel® Core™ 14th & 13th Gen Processors, Intel® Core™ 12th Gen, Pentium® Gold and Celeron® Processors* CPU Supports Intel® Turbo Boost Technology 2.0 and Intel® Turbo Boost Max Technology 3.0** * Refer to www.asus.com for CPU support list. ** Intel® Turbo Boost Max Technology 3.0 support depends on the CPU types. Chipset Intel® Z790 Chipset 4 x DIMM slots, Max.
PRIME Z790-V AX specifications summary Rear USB (Total 8 ports) 1 x USB 3.2 Gen 2x2 (20G) port (1 x USB Type-C®) 1 x USB 3.2 Gen 2 (10G) port (1 x Type-A) 2 x USB 3.2 Gen 1 (5G) ports (2 x Type-A) 4 x USB 2.0 ports (4 x Type-A) USB Front USB (Total 9 ports) 1 x USB 3.2 Gen 1 (5G) connector (supports USB Type-C®) 2 x USB 3.2 Gen 1 (5G) headers support 4 additional USB 3.2 Gen 1 ports 2 x USB 2.0 headers support 4 additional USB 2.
PRIME Z790-V AX specifications summary Miscellaneous 3 x Addressable Gen 2 headers 1 x Aura RGB header 1 x Clear CMOS header Internal I/O Connectors 1 x COM Port header 1 x Front Panel Audio header (AAFP) 1 x S/PDIF Out header 1 x SPI TPM header (14-1pin) 1 x 20-5pin System Panel header 1 x Thunderbolt™ header ASUS 5X PROTECTION III - DIGI+ VRM (- Digital power design with DrMOS) - LANGuard - Overvoltage Protection - SafeSlot Core+ - Stainless-Steel Back I/O ASUS Q-Design - Q-DIMM Special Features - Q-Sl
PRIME Z790-V AX specifications summary UEFI BIOS ASUS EZ DIY Software Features - ASUS CrashFree BIOS 3 - ASUS EZ Flash 3 - ASUS UEFI BIOS EZ Mode BIOS 192 (128+64) Mb Flash ROM, UEFI AMI BIOS Manageability WOL by PME, PXE Operating System Windows® 11, Windows® 10 64-bit Form Factor ATX Form Factor 12 inch x 9.2 inch (30.5 cm x 23.4 cm) • Specifications are subject to change without notice. Please refer to the ASUS website for the latest specifications.
Package contents Check your motherboard package for the following items. Motherboard 1 x PRIME Z790-V AX motherboard Cables 2 x SATA 6Gb/s cables 1 x ASUS Wi-Fi moving antennas Miscellaneous 1 x I/O Shield 2 x Screw packages for M.2 SSD Documentation 1 x User guide If any of the above items is damaged or missing, contact your retailer.
Product Introduction Product Introduction 1.1 Before you proceed 1 Chapter 1 Chapter 1: Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
1.2 Motherboard layout 5 4 23.4cm(9.2in) 1 4 2 4 ATX_12V_2 ATX_12V_1 DIGI+ VRM ASM 1442K ADD_GEN 2_1 RGB_HEADER Chapter 1 CPU_OPT CPU_FAN AIO_PUMP HDMI LGA1700 12 11 ATX_PWR U32G2X2_C1 U32G2_3 DDR5 DIMM_B2 (64bit, 288-pin module) LAN_USB_E56 DDR5 DIMM_B1 (64bit, 288-pin module) U32G1_910 DDR5 DIMM_A2 (64bit, 288-pin module) DDR5 DIMM_A1 (64bit, 288-pin module) KBMS_USB_E78 5 M.2_1(SOCKET3) SATA X IRST V 2242 Ethernet 2260 1st 22110 2280 U32G1_C4 PCIE 4.0 X4 30.
PRIME Z790-V AX Page 1-4 1-5 1-7 1-8 1-9 1-10 1-11 1-12 1-12 1-13 1-14 1-15 1-16 1-17 1-17 1-18 1-18 1-19 1-20 Chapter 1 Layout contents 1. CPU socket 2. DIMM slots 3. Expansion slots 4. Fan and Pump headers 5. Power connectors 6. M.2 slots (SOCKET 3) 7. SATA 6Gb/s ports 8. USB 3.2 Gen 1 Type-C® Front Panel connector 9. USB 3.2 Gen 1 headers 10. USB 2.0 headers 11. Addressable Gen 2 headers 12. Aura RGB header 13. Clear CMOS header 14. COM Port header 15. Front Panel Audio header 16.
1. CPU socket The motherboard comes with a LGA1700 socket designed for Intel® Core™ 14th & 13th Gen Processors, Intel® Core™ 12th Gen, Pentium® Gold and Celeron® Processors. Chapter 1 LGA1700 1-4 • Ensure that you install the correct CPU designed for LGA1700 socket only. DO NOT install a CPU designed for other sockets on the LGA1700 socket. • The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU.
2. DIMM slots The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed for DDR5 (Double Data Rate 5) memory modules. DIMM_A1 DIMM_A2 DIMM_B1 DIMM_B2 Chapter 1 A DDR5 memory module is notched differently from a DDR, DDR2, DDR3 or DDR4 module. DO NOT install a DDR, DDR2, DDR3 or DDR4 memory module to the DDR5 slot.
Memory configurations You may install 8 GB, 16 GB, 24 GB, 32 GB, and 48 GB unbuffered and non‑ECC DDR5 DIMMs into the DIMM sockets. Chapter 1 You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation.
3. Expansion slots Chapter 1 Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. 1 PCIEX16 2 PCIEX16(G4)_1 3 PCIEX16(G4)_2 PCIEX1(G3) 4 PCIEX16(G4)_3 Please refer to the following tables for the recommended VGA configuration and Hyper M.2 configuration. Recommended VGA configuration Slot Description 1 PCIe 5.0 x16 2 PCIe 4.0 x16_1 3 PCIe 4.0 x16_2 4 PCIe 4.
PCIe bifurcation & M.2 settings in PCIe x16 slot (from CPU) Quantity of identifiable M.2 SSD (pcs) Situation 1 Situation 2 Slot Description Chapter 1 PCIe x16 1(x16)* 2(x8+x8)** * Install an M.2 SSD card to the M.2_1 or M.2_3 slot on the Hyper M.2 X16 series card. ** Install two M.2 SSD cards to the M.2_1 and M.2_3 slots on the Hyper M.2 X16 series card. 4. • Additional PCIe bifurcation and M.2 settings for RAID function are also supported when a Hyper M.2 x16 series card is installed.
5. Max. Current 1A 1A 1A 1A 1A 1A Max. Power 12W 12W 12W 12W 12W 12W Default Speed Q-Fan Controlled Q-Fan Controlled Q-Fan Controlled Q-Fan Controlled Q-Fan Controlled Full-Speed Shared Control A A - Chapter 1 Header CPU_FAN CPU_OPT CHA_FAN1 CHA_FAN2 CHA_FAN3 AIO_PUMP Power connectors These Power connectors allow you to connect your motherboard to a power supply. The power supply plugs are designed to fit in only one orientation.
6. M.2 slots The M.2 slots allow you to install M.2 devices such as M.2 SSD modules. Chapter 1 A A M.2_1(SOCKET3) B M.2_2(SOCKET3) C M.2_3(SOCKET3) B C • Intel® 14th and13th and 12th Gen processors: • Intel® Z790 Chipset: M.2_1 slot (Key M), type 2242/2260/2280/22110 (supports PCIe 4.0 x4 mode) M.2_2 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode) M.2_3 slot (Key M), type 2242/2260/2280/22110 (supports PCIe 4.0 x4 & SATA modes).
7. SATA 6Gb/s ports GND RSATA_TXP RSATA_TXN GND RSATA_RXN RSATA_RXP GND Chapter 1 The SATA 6Gb/s ports allow you to connect SATA devices such as optical disc drives and hard disk drives via a SATA cable. B C D A B C D SATA6G_1 SATA6G_2 SATA6G_3 SATA6G_4 GND RSATA_RXP RSATA_RXN GND RSATA_TXN RSATA_TXP GND A If you installed SATA storage devices, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® Z790 chipset.
8. USB 3.2 Gen 1 Type-C® Front Panel connector The USB 3.2 Gen 1 Type-C® connector allows you to connect a USB 3.2 Gen 1 Type-C® module for an additional USB 3.2 Gen 1 Type-C® port on the front panel. The USB 3.2 Gen 1 Type-C® connector provides data transfer speeds of up to 5 Gb/s. Chapter 1 U32G1_C4 NC NC CC1 VBUS RX1RX1+ GND TX1TX1+ VBUS VBUS TX2+ TX2GND RX2+ RX2GND DD+ CC2 The USB 3.2 Gen 1 Type-C® module is purchased separately. 9. USB 3.2 Gen 1 headers The USB 3.
10. USB 2.0 headers A B USB_E12 USB_E34 PIN 1 USB+5V USB_P2USB_P2+ GND USB+5V USB_P1USB_P1+ GND NC Chapter 1 The USB 2.0 headers allow you to connect USB modules for additional USB 2.0 ports. The USB 2.0 headers provide data transfer speeds of up to 480 Mb/s. A B DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! • The USB 2.0 module is purchased separately. • USB_E1 port, USB_E2 port, USB_E3 port and USB_E4 port share the bandwidth.
11. Addressable Gen 2 headers The Addressable Gen 2 headers allow you to connect individually addressable RGB WS2812B LED strips or WS2812B based LED strips. Chapter 1 A A B C ADD_GEN 2_1 ADD_GEN 2_3 ADD_GEN 2_2 Ground Data 5V PIN 1 B C The Addressable Gen 2 headers support WS2812B addressable RGB LED strips (5V/ Data/Ground), with a maximum power rating of 3A (5V) and the addressable headers on this board can handle a combined maximum of 500 LEDs.
12. Aura RGB header Chapter 1 The RGB header allows you to connect RGB LED strips. RGB_HEADER B R G +12V PIN 1 The RGB headers support 5050 RGB multi-color LED strips (12V/G/R/B), with a maximum power rating of 3A (12V). Before you install or remove any component, ensure that the power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components.
13. Clear CMOS header The Clear CMOS header allows you to clear the Real Time Clock (RTC) RAM in the CMOS, which contains the date, time, system passwords, and system setup parameters. Chapter 1 CLRTC +3V_BAT GND PIN 1 To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2. Use a metal object such as a screwdriver to short the two pins. 3. Plug the power cord and turn on the computer. 4. Hold down the key during the boot process and enter BIOS setup to reenter data.
14. COM Port header RXD DTR DSR CTS Chapter 1 The COM (Serial) Port header allows you to connect a COM port module. Connect the COM port module cable to this header, then install the module to a slot opening on the system chassis. COM DCD TXD GND RTS RI PIN 1 The COM port module is purchased separately. 15. Front Panel Audio header SENSE2_RETUR AGND NC SENSE1_RETUR The front panel audio header is for a chassis-mounted front panel audio I/O module that supports HD Audio.
16. S/PDIF Out header The S/PDIF Out header allows you to connect the Sony/Philips Digital Interface (S/ PDIF) Out module. Chapter 1 SPDIF_OUT SPDIFOUT GND +5V PIN 1 The S/PDIF module is purchased separately. 17. SPI TPM header (14-1pin) This header supports a Trusted Platform Module (TPM) system with a Serial Peripheral Interface (SPI), allowing you to securely store keys, digital certificates, passwords, and data.
18. System Panel header Chapter 1 The System Panel header supports several chassis-mounted functions. +5V Ground Ground Speaker PLED+ PLEDPWRBTN# GND +PWR_LED- PWR_SW SPEAKER PANEL PLED- HDD_LED+ HDD_LEDGround RSTCON# NC PLED+ PIN 1 +HDD_LED- RESET +PWR_LED- • System Power LED header (+PWR_LED-) The 2-pin and/or 3-1 pin headers allow you to connect the System Power LED.
19. ThunderboltTM header The Thunderbolt™ header allows you to connect an add-on Thunderbolt™ I/O card that supports Intel®’s Thunderbolt™ Technology, allowing you to connect Thunderbolt™-enabled devices to form a daisy chain-configuration. I2C_SCL I2C_SDA I2C_IRQ# RTD3_POWER_EN SLP_S0_PLT_N_10 PERST_N WAKE# Chapter 1 TB_HEADER RTD3_SW FORCE_PWR TB_CIO_PLUG_EVENT SLP_S3# SLP_S5# GND PIN 1 • The add-on Thunderbolt™ I/O card and Thunderbolt™ cables are purchased separately.
Chapter 2: Basic Installation Basic Installation 2.1 Building your PC system 2 The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps are the same for all models. CPU installation • Ensure that you install the correct CPU designed for LGA1700 socket only. DO NOT install a CPU designed for LGA1200, LGA1155, LGA1156, and LGA1151 sockets on the LGA1700 socket.
Chapter 2 2-2 Chapter 2: Basic Installation
2.1.2 Cooling system installation Chapter 2 pply Thermal Interface Material to the A CPU cooling system and CPU before you install the cooling system, if necessary.
Bottom side of motherboard LGA1200 Chapter 2 LGA1700 • We recommend using a LGA1700 compatible cooling system on an Intel® 700 series motherboard. • Additional holes for LGA1200 compatible cooling systems are also available on ASUS’ Intel® 700 series motherboards, however, we still strongly advise consulting with your cooling system vendor or manufacturer on the compatibility and functionality of the cooling system.
To install an AIO cooler We recommend using a LGA1700 compatible cooling system on an Intel® 600 & 700 series motherboard. • Additional holes for LGA1200 compatible cooling systems are also available on ASUS’ Intel® 600 & 700 series motherboards, however, we still strongly advise consulting with your cooling system vendor or manufacturer on the compatibility and functionality of the cooling system.
2.1.
2.1.4 M.2 installation To install an M.2 SSD card 1 1 Chapter 2 1 3 2 3 2 3 2 The M.2 SSD module is purchased separately.
2.1.5 1. Motherboard installation Install the ASUS I/O Shield to the chassis rear I/O panel. Some sharp edges and points might cause physical injury. We recommend you put on cut or puncture resistant gloves before motherboard and I/O shield installation. Chapter 2 2. 2-8 Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis’ rear I/O panel.
Place six (6) screws into the holes indicated by circles to secure the motherboard to the chassis. Chapter 2 3. DO NOT over tighten the screws! Doing so can damage the motherboard.
2.1.6 ATX power connection Chapter 2 OR AND Ensure to connect the 8-pin power plug, or connect both the 8-pin and 4-pin power plugs.
2.1.
2.1.8 Front I/O connector To install front panel connector To install USB 3.2 Gen 1 Type-C® connector USB 3.2 Gen 1 Type-C® Chapter 2 This connector will only fit in one orientation. Push the connector until it clicks into place. To install USB 3.2 Gen 1 connector To install USB 2.0 connector USB 2.0 USB 3.
2.1.
To install Thunderbolt™ series card 6-pin PCIe power connector USB Type-C® port connects to Thunderbolt devices Chapter 2 MiniDP in port connects to DP out port on the motherboard or a VGA card USB 2.0 header Thunderbolt™ header The Thunderbolt™ card can only be used when installed to the PCIEX16(G4)_3 slot. Ensure to install your Thunderbolt™ card to the PCIEX16(G4)_3 slot.
2.1.10 Wi-Fi antenna installation Installing the ASUS Wi-Fi moving antenna Chapter 2 Connect the bundled Wi-Fi moving antenna connectors to the Wi-Fi ports at the back of the chassis. • Ensure that the Wi-Fi moving antenna is securely installed to the Wi-Fi ports. • Ensure that the antenna is at least 20 cm away from all persons. The illustration above is for reference only. The I/O port layout may vary with models, but the Wi-Fi antenna installation procedure is the same for all models. 2.
Rear panel connectors 1. 2. 3. 4. 5. 6. 7. PS/2 Keyboard/Mouse combo port Realtek 1Gb Ethernet port* USB 3.2 Gen 2 Type-A port 3 HDMI™ port USB 2.0 ports E5, E6, E7 and E8 USB 3.2 Gen 1 Type-A ports 9 and 10 USB 3.2 Gen 2x2 Type-C® port 1 8. Audio Jacks** 9. Wi-Fi ports * and ** : Refer to the tables on the next page for LAN port LEDs, and audio port definitions. Chapter 2 We strongly recommend that you connect your devices to ports with matching data transfer rate. Please connect your USB 3.
2.2.
Connect to 5.1-channel Speakers Chapter 2 Connect to 7.
2.3 Starting up for the first time 1. After making all the connections, replace the system case cover. 2. Ensure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis. 4. Connect the power cord to a power outlet that is equipped with a surge protector. 5. Turn on the devices in the following order: Monitor b. External storage devices (starting with the last device on the chain) c.
Chapter 2 2-20 Chapter 2: Basic Installation
Chapter 3: BIOS and RAID Support BIOS and RAID Support 3 For more details on BIOS and RAID configurations, please refer to www.asus.com/ support. 3.1 Knowing BIOS The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboardonly BIOS controls to enable a more flexible and convenient mouse input. You can easily navigate the new UEFI BIOS with the same smoothness as your operating system.
3.2 BIOS Setup program Use the BIOS Setup to update the BIOS or configure its parameters. The BIOS screens include navigation keys and brief onscreen help to guide you in using the BIOS Setup program. Entering BIOS at startup To enter BIOS Setup at startup, press or during the Power-On Self Test (POST). If you do not press or , POST continues with its routines. Entering BIOS Setup after POST To enter BIOS Setup after POST: • Press ++ simultaneously.
3.3 ASUS EZ Flash 3 The ASUS EZ Flash 3 feature allows you to update the BIOS without using an OS‑based utility. Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu or press hotkey . To update the BIOS: • This function can support devices such as a USB flash disk with FAT 32/16 format and single partition only.
3.4 ASUS CrashFree BIOS 3 The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS file using a USB flash drive that contains the BIOS file. Recovering the BIOS 1. Download the latest BIOS version for this motherboard from https://www.asus.com/support/. 2. Rename the BIOS file as ASUS.CAP or A5520.CAP and copy the renamed BIOS file to a USB flash drive. 3.
3.5 RAID configurations The motherboard comes with the Intel® Rapid Storage Technology that supports RAID 0, RAID 1, RAID 5 and RAID 10 configuration. For more information on configuring your RAID sets, please refer to the RAID Configuration Guide which you can find at https://www.asus.com/support, or by scanning the code. RAID definitions RAID 0 (Data striping) optimizes two identical hard disk drives to read and write data in parallel, interleaved stacks.
Chapter 3 3-6 Chapter 3: BIOS and RAID Support
Appendix Appendix Notices FCC Compliance Information Responsible Party: Address: Phone / Fax No: Asus Computer International 48720 Kato Rd., Fremont, CA 94538, USA (510)739-3777 / (510)608-4555 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
VCCI: Japan Compliance Statement Class B ITE Japan JATE 本製品は電気通信事業者（移動通信会社、固定通信会社、インターネットプロバイダ等）の通信 回線（公衆無線LANを含む）に直接接続することができません。本製品をインターネットに接続す る場合は、必ずルーター等を経由し接続してください。 Declaration of compliance for product environmental regulation ASUS follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASUS product is in line with global environmental regulations.
Türkiye RoHS AEEE Yönetmeliğine Uygundur ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions. DO NOT throw the motherboard in municipal waste.
Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
NCC: Wireless Statement 取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不 得擅自變更頻率、加大功率或變更原設計之特性及功能。低功率射頻器 材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應 立即停用，並改善至無干擾時方得繼續使用。前述合法通信，指依電信 管理法規定作業之無線電通信。低功率射頻器材須忍受合法通信或工 業、科學及醫療用電波輻射性電機設備之干擾。 應避免影響附近雷達系統之操作。 Japan RF Equipment Statement 屋外での使用について 5GHz帯（W52/53）及び6GHz帯（LPI）の屋外での使用は、電波法により禁じられています（法令に より許可された場合は除く） （6GHz帯は対応製品のみ）。 法律および規制遵守 本製品は電波法及びこれに基づく命令の定めるところに従い使用してください。日本国外では、 その国の法律または規制により、本製品の使用ができないことがあります。このような国では、本 製品を運用した結果、罰せられることがありますが、当社は一切責任を負いかねますのでご了承 ください。 Précautions d’emp
Simplified UKCA Declaration of Conformity ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of The Radio Equipment Regulations 2017 (S.I. 2017/1206). Full text of UKCA declaration of conformity is available at https://www.asus.com/support/.
PRIME Z790-V AX Упрощенное заявление о соответствии европейской директиве ASUSTek Computer Inc. заявляет, что устройство соответствует основным требованиям и другим соответствующим условиям директивы 2014/53/EU. Полный текст декларации соответствия ЕС доступен на https://www.asus.com/support/. Работа WiFi в диапазоне частот 5150-5350 должна быть ограничена использованием в помещениях для стран, перечисленных в таблице ниже: a.
Appendix Pojednostavljena EU Izjava o sukladnosti ASUSTeK Computer Inc. ovim izjavljuje da je ovaj uređaj sukladan s bitnim zahtjevima i ostalim odgovarajućim odredbama direktive 2014/53/EU. Cijeli tekst EU izjave o sukladnosti dostupan je na https://www.asus.com/support/. WiFi koji radi na opsegu frekvencija 5150-5350 MHz bit će ograničen na upotrebu u zatvorenom prostoru u zemljama na donjem popisu: a.
:)LPI( לבית בהספק נמוךWi-Fi מכשיריa. עד5945 המכשיר מוגבל לשימוש פנימי בלבד בשימוש בטווח התדרים אסטוניה,)CZ( צ'כיה,)CY( קפריסין,)BG( בולגריה,)BE( בבלגיה6425MHz הולנד,)DE( גרמניה,)LT( ליטא,)IE( אירלנד,)IS( איסלנד,)FR( צרפת,)EE( .)ES( ספרד,)NL( :)) (מכשירים ניידיםVLP( בהספק נמוך מאודWi-Fi מכשיריb.
Appendix Declarație de conformitate UE, versiune simplificată Prin prezenta, ASUSTek Computer Inc. declară că acest dispozitiv este în conformitate cu reglementările esențiale și cu celelalte prevederi relevante ale Directivei 2014/53/UE. Textul complet al declarației de conformitate UE este disponibil la adresa https://www.asus.com/support/. Pentru ţările listate în tabelul de mai jos, reţelele WiFi care funcţionează în banda de frecvenţă de 5.150-5.350 MHz trebuie utilizate doar în interior: a.
ASUSTek Computer Inc. заявляє, що цей пристрій відповідає основним вимогам та іншим відповідним вимогам Директиви 2014 / 53 / EU. Повний текст декларації відповідності нормам ЄС доступний на https://www.asus.com/support/. Робота Wi-Fi на частоті 5150-5350 МГц обмежується використанням у приміщенні для країн, поданих у таблиці нижче: a. b.
Warranty EN: ASUS Guarantee Information • ASUS offers a voluntary manufacturer’s Commercial Guarantee. • ASUS reserves the right to interpret the provisions of the ASUS Commercial Guarantee. • This ASUS Commercial Guarantee is provided independently and in addition to the statutory Legal Guarantee and in no way affects or limits the rights under the Legal Guarantee. CR: Informacije o ASUS jamstvu • ASUS dragovoljno nudi komercijalno proizvođačko jamstvo.
PRIME Z790-V AX SW: ASUS garantiinformation • ASUS erbjuder en frivillig kommersiell tillverkningsgaranti. • ASUS förbehåller sig rätten att tolka bestämmelserna i ASUS kommersiella garanti. • Denna kommersiella garanti från ASUS tillhandahålles separat och som tillägg till den lagstadgade garantin, och påverkar eller begränsar på intet sätts rättigheterna under den lagstadgade garantin. För all garantiinformation, besök https://www.asus.com/se/support/.
ASUS contact information ASUSTeK COMPUTER INC. Address: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112 ASUS COMPUTER INTERNATIONAL (America) Address: 48720 Kato Rd., Fremont, CA 94538, USA ASUS COMPUTER GmbH (Germany and Austria) Address: Harkortstrasse 21-23, 40880 Ratingen, Germany ASUSTeK (UK) LIMITED Address: 1st Floor, Sackville House, 143-149 Fenchurch Street, London, EC3M 6BL, England, United Kingdom Service and Support Visit our multi-language website at https://www.asus.com/support.
