Installation Guide

ASUS Motherboard installation guide

Front panel connector pins

• RESET (Reset Switch)

• PLED (Power LED)

• PWRSW / PWRBTN (Power Switch)

• SPEAKER (Speaker Connector)

• CHASSIS (Chassis intrusion)

• HDD_LED / HDLED (Hard disk drive activity LED)

1.9 Front I/O connector

• The front panel cables of your chassis may differ with models or designs. Connect

these connectors to the motherboard according to the label.

• If the LEDs do not light up and the pin location is correct, you might have mistaken the

ground pins with the signal pins. Usually the white wire stands for the ground pins and

the color-coded wire for the signal pins.

• The SPEAKER, RESET and PWRSW front panel cables have no specic orientation,

while PLED cables do. Connect the cable PIN1 to the connector PIN1 on the

motherboard.

• The front panel connector varies with your motherboard model, refer to the user guide

for more details.

20-3 pin front panel connector 20-5 pin front panel connector

10-1 pin front panel connector and 4-pin speaker connector