User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Knowing BIOS
- 4.2 BIOS setup program
- 4.3 My Favorites
- 4.4 Main menu
- 4.5 Ai Tweaker menu
- 4.6 Advanced menu
- 4.6.1 Platform Misc Configuration
- 4.6.2 CPU Configuration
- 4.6.3 System Agent (SA) Configuration
- 4.6.4 PCH Configuration
- 4.6.5 PCH Storage Configuration
- 4.6.6 PCH-FW Configuration
- 4.6.7 PCI Subsystem Settings
- 4.6.8 USB Configuration
- 4.6.9 Network Stack Configuration
- 4.6.10 NVMe Configuration
- 4.6.11 Onboard Devices Configuration
- 4.6.12 APM Configuration
- 4.6.13 HDD/SSD SMART Information
- 4.7 Monitor menu
- 4.8 Boot menu
- 4.9 Tool menu
- 4.10 Exit menu
- 4.11 Updating BIOS
- Chapter 5: RAID Configuration
- Appendix
ASUS Pro E500 G6
1-9
MIC IN
REAR C/SUB
LINE OUT
LINE IN
KY
DVI
VGA OUT
HDMI
Display/Port
TYPE C
10
SPDIF OUT
2.5G
1.7.2 Rear panel LEDs
ACT/LINK LED
USB 3.0
MIC IN
SIDE REAR C/SUB
LINE OUT LINE IN
KY
DVI
VGA
OUT
HDMI
SPDIF OUT
Display/Port
USB 3.1
10
USB 3.0
SPEED LED
You can disable the LAN controllers in BIOS. Due to hardware design, the LAN1 port’s
LEDs may continue to blink even when disabled.
Intel
®
I219-LM 1G LAN ports LED indications
Activity Link LED Speed LED
Status Description Status Description
Off
No link Off 10 Mbps connection
Orange
Linked Orange 100 Mbps connection
Orange (Blinking)
Data activity Green 1 Gbps connection
Orange (Blinking then steady)
Ready to wake
up from S5 mode
Activity Link LED Speed LED
Status Description Status Description
Off
No link Off 10/100 Mbps connection
Green
Linked Orange 1 Gbps connection
Green (Blinking)
Data activity Green 2.5 Gbps connection
Green (Blinking then steady)
Ready to wake
up from S5 mode
Intel
®
I225-LM 2.5G LAN ports LED indications