User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Knowing BIOS
- 4.2 BIOS setup program
- 4.3 My Favorites
- 4.4 Main menu
- 4.5 Ai Tweaker menu
- 4.6 Advanced menu
- 4.6.1 Platform Misc Configuration
- 4.6.2 CPU Configuration
- 4.6.3 System Agent (SA) Configuration
- 4.6.4 PCH Configuration
- 4.6.5 PCH Storage Configuration
- 4.6.6 PCH-FW Configuration
- 4.6.7 PCI Subsystem Settings
- 4.6.8 USB Configuration
- 4.6.9 Network Stack Configuration
- 4.6.10 NVMe Configuration
- 4.6.11 Onboard Devices Configuration
- 4.6.12 APM Configuration
- 4.6.13 HDD/SSD SMART Information
- 4.7 Monitor menu
- 4.8 Boot menu
- 4.9 Tool menu
- 4.10 Exit menu
- 4.11 Updating BIOS
- Chapter 5: RAID Configuration
- Appendix
ASUS Pro E500 G6
4-15
The following item appears only when Ai Overclock Tuner is set to [XMP I] or [XMP II].
XMP
This item allows you to select your eXtreme Memory Prole (XMP). Each prole has its
own DRAM frequency, timing and voltage.
The following items appear only when Ai Overclock Tuner is set to [XMP I], [XMP II], or
[Manual].
BCLK Frequency
This item allows you to set the BCLK (base clock) frequency to enhance the system
performance. Use the <+> or <-> to adjust the value.
We recommend you to set the value based on the CPU specication, as high BCLK
frequencies may damage the CPU permanently.
BCLK Spread Spectrum
This item allows you to enable or disable the BCLK Spread Spectrum. When set to
[Enabled] the peak value of EMI emissions is reduced. Set to [Disabled] for a more
accurate Base Clock.
Conguration options: [Auto] [Disabled] [Enabled]
ASUS MultiCore Enhancement
[Auto - Lets BIOS Optimize] This item allows you to use ASUS optimized core ratio
Turbo settings at default processor speeds.
[Disabled - Enforce All limits] This item allows you to use Intel default Turbo core ratio
settings.
[Enabled - Remove All limits] This item allows you to use optimized power and current
thresholds for maintaining maximum performance.