User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Knowing BIOS
- 4.2 BIOS setup program
- 4.3 My Favorites
- 4.4 Main menu
- 4.5 Ai Tweaker menu
- 4.6 Advanced menu
- 4.6.1 Platform Misc Configuration
- 4.6.2 CPU Configuration
- 4.6.3 System Agent (SA) Configuration
- 4.6.4 PCH Configuration
- 4.6.5 PCH Storage Configuration
- 4.6.6 PCH-FW Configuration
- 4.6.7 PCI Subsystem Settings
- 4.6.8 USB Configuration
- 4.6.9 Network Stack Configuration
- 4.6.10 NVMe Configuration
- 4.6.11 Onboard Devices Configuration
- 4.6.12 APM Configuration
- 4.6.13 HDD/SSD SMART Information
- 4.7 Monitor menu
- 4.8 Boot menu
- 4.9 Tool menu
- 4.10 Exit menu
- 4.11 Updating BIOS
- Chapter 5: RAID Configuration
- Appendix
ASUS Pro E500 G6
4-35
Hardware Prefetcher
This item allows you to enable or disable the MLC streamer prefetcher.
Conguration options: [Disabled] [Enabled]
Adjacent Cache Line Prefetch
This item allows you to prefetch adjacent cache lines, reducing the DRAM loading time and
improving the system performance.
Conguration options: [Disabled] [Enabled]
Intel (VMX) Virtualization Technology
When set to [Enabled], VMX can utilize the additional hardware capabilities provided by
Vanderpool Technology.
Conguration options: [Disabled] [Enabled]
Active Processor Cores
This item allows you to select the number of CPU cores to activate in each processor
package.
Conguration options: [All] [1] - [9]
Hyper-Threading
This item allows a hyper-threading processor to appear as two logical processors, allowing
the operating system to schedule two threads or processes simultaneously.
[Enabled] For two threads per activated core.
[Disabled] For only one thread per activated core.
The following item appears only when Hyper-Threading is set to [Enabled].
Per Core Hyper-Threading
Hyper-Threadign of Core 0-9
Conguration options: [Auto] [Enabled] [Disabled]
MonitorMWait
This item allows you to enable or disable MonitorMWait.
Conguration options: [Disabled] [Enabled]
CPU - Power Management Control
This item allows you to manage and congure the CPU’s power.
Boot performance mode
This item allows you to select the CPU performance state during system boot before
the operating system takes control. The CPU runs at a selected performance ratio
based on CPU conguration.
Conguration options: [Auto] [Max Battery] [Max Non-Turbo Performance]
[Turbo Performance]
Intel(R) SpeedStep(tm)
This item allows more than two frequency to be supported.
Conguration options: [Auto] [Enabled] [Disabled]