User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Knowing BIOS
- 4.2 BIOS setup program
- 4.3 My Favorites
- 4.4 Main menu
- 4.5 Ai Tweaker menu
- 4.6 Advanced menu
- 4.6.1 Platform Misc Configuration
- 4.6.2 CPU Configuration
- 4.6.3 System Agent (SA) Configuration
- 4.6.4 PCH Configuration
- 4.6.5 PCH Storage Configuration
- 4.6.6 PCH-FW Configuration
- 4.6.7 PCI Subsystem Settings
- 4.6.8 USB Configuration
- 4.6.9 Network Stack Configuration
- 4.6.10 NVMe Configuration
- 4.6.11 Onboard Devices Configuration
- 4.6.12 APM Configuration
- 4.6.13 HDD/SSD SMART Information
- 4.7 Monitor menu
- 4.8 Boot menu
- 4.9 Tool menu
- 4.10 Exit menu
- 4.11 Updating BIOS
- Chapter 5: RAID Configuration
- Appendix
ASUS Pro E500 G6
4-17
Primary Timings
DRAM CAS# Latency
Conguration options: [Auto] [1] - [31]
DRAM RAS# to CAS# Delay
Conguration options: [Auto] [1] - [63]
DRAM RAS# ACT Time
Conguration options: [Auto] [1] - [63]
DRAM Command Rate
Conguration options: [Auto] [1N] [2N] [3N] [N:1]
The following item appears only when DRAM Command Rate is set to [N:1].
N to 1 ratio
Number of bubbles between wach valid command cycle.
Congurations: [4] - [7]
Secondary Timings
DRAM RAS# to RAS# Delay L
Conguration options: [Auto] [1] - [15]
DRAM RAS# to RAS# Delay S
Conguration options: [Auto] [1] - [15]
DRAM REF Cycle Time
Conguration options: [Auto] [1] - [1023]
DRAM REF Cycle Time 2
Conguration options: [Auto] [1] - [1023]
DRAM REF Cycle Time 4
Conguration options: [Auto] [1] - [1023]
DRAM Refresh Interval
Conguration options: [Auto] [1] - [65535]
DRAM WRITE Recovery Time
Conguration options: [Auto] [1] - [31]
DRAM READ to PRE Time
Conguration options: [Auto] [1] - [15]
DRAM FOUR ACT WIN Time
Conguration options: [Auto] [1] - [63]
DRAM WRITE to READ Delay
Conguration options: [Auto] [1] - [15]
DRAM WRITE to READ Delay L
Conguration options: [Auto] [1] - [15]