User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Knowing BIOS
- 4.2 BIOS setup program
- 4.3 My Favorites
- 4.4 Main menu
- 4.5 Ai Tweaker menu
- 4.6 Advanced menu
- 4.6.1 Platform Misc Configuration
- 4.6.2 CPU Configuration
- 4.6.3 System Agent (SA) Configuration
- 4.6.4 PCH Configuration
- 4.6.5 PCH Storage Configuration
- 4.6.6 PCH-FW Configuration
- 4.6.7 PCI Subsystem Settings
- 4.6.8 USB Configuration
- 4.6.9 Network Stack Configuration
- 4.6.10 NVMe Configuration
- 4.6.11 Onboard Devices Configuration
- 4.6.12 APM Configuration
- 4.6.13 HDD/SSD SMART Information
- 4.7 Monitor menu
- 4.8 Boot menu
- 4.9 Tool menu
- 4.10 Exit menu
- 4.11 Updating BIOS
- Chapter 5: RAID Configuration
- Appendix
4-28
Chapter 4: BIOS Setup
Internal CPU Power Management
The items in this submenu allow you to set the CPU ratio and features.
Maximum CPU Core Temperature
This item allows you to set the allowable temperature for CPU cores. The CPU will
throttle or shutdown when it reaches this temperature to prevent damaging the cores.
Use the <+> and <-> keys to adjust the value.
Conguration options: [Auto] [62] - [115]
Turbo Mode Parameters
CPU Core/Cache Current Limit Max.
This item allows you to congure a higher current limit to prevent a frequency or power
throttling when overclocking. Use the <+> and <-> keys to adjust the value.
Conguration options: [Auto] [0.00] - [255.75]
CPU Graphics Current Limit
This item allows you to congure a higher current limit to prevent a frequency or power
throttling when overclocking. Use the <+> and <-> keys to adjust the value.
Conguration options: [Auto] [0.00] - [255.50]
Long Duration Package Power Limit
An Intel parameter known as “power limit” and specied in Watts. The defualt value is
dened by TDP of the processor. Increasing the value will allow the Turbo ratio to be
maintained for a longer duration under higher current loads. Use the <+> and <-> keys
to adjust the value.
Conguration options: [Auto] [1] - [4095]
Package Power Time Window
An Intel parameter of “power limit 1” and specied in seconds. The applied value
indicates how long the Turbo ratio can be active when TDP is exceeded.
Conguration options: [Auto] [1] - [448]
Short Duration Package Power Limit
An Intel parameter known as “power limit 2” and specied in Watts. It is the second
Intel power limit which provides protection when package power exceeds power limit
1. The default setting is 1.25 times power limit 1. According to Intel, the platform must
support this value for up to 10msec when power consumption exceeds power limit
2. ASUS motherboards are engineered to support this duration for a longer time as
required to facilitate overclocking. Use the <+> and <-> keys to adjust the value.
Conguration options: [Auto] [1] - [4095]
IA AC Load Line
This item allows you to set the AC loadline dened in 1/100 mOhms. Use the <+> and
<-> keys to adjust the value.
Conguration options: [Auto] [0.01] - [62.49]
IA DC Load Line
This item allows you to set the DC loadline dened in 1/100 mOhms. Use the <+> and
<-> keys to adjust the value.
Conguration options: [Auto] [0.01] - [62.49]