User Manual
Table Of Contents
- 目录
- 使用注意事项
- 用电安全
- 关于本用户手册
- 第一章:系统导览
- 第二章:硬件安装
- 第三章:主板信息
- 第四章:BIOS 程序设置
- 4.1 认识 BIOS 程序
- 4.2 BIOS 程序设置
- 4.3 我的最爱(My Favorites)菜单
- 4.4 主菜单(Main Menu)
- 4.5 Ai Tweaker 菜单
- 4.6 高级菜单(Advanced menu)
- 4.6.1 平台各项设置(Platform Misc Configuration)
- 4.6.2 处理器设置(CPU Configuration)
- 4.6.3 系统代理设置(System Agent Configuration)
- 4.6.4 PCH 设置(PCH Configuration)
- 4.6.5 PCH 储存设备设置(PCH Storage Configuration)
- 4.6.6 PCH-FW 设置(PCH-FW Configuration)
- 4.6.7 PCI 子系统设置(PCI Subsystem Settings)
- 4.6.8 USB 设备设置(USB Configuration)
- 4.6.9 网络协定堆栈设置(Network Stack Configuration)
- 4.6.10 NVMe 设置(NVMe Configuration)
- 4.6.11 内置设备设置(OnBoard Devices Configuration)
- 4.6.12 高级电源管理设置(APM Configuration)
- 4.6.13 HDD/SSD SMART Information
- 4.7 监控菜单(Monitor menu)
- 4.8 启动菜单(Boot menu)
- 4.9 工具菜单(Tool menu)
- 4.10 退出 BIOS 程序(Exit menu)
- 4.11 升级 BIOS 程序
- 第五章:磁盘阵列设置
- 附录
Code Description
A5 SCSI Reset
A6 SCSI Detect
A7 SCSI Enable
A8 Setup Verifying Password
A9 Start of Setup
AA Reserved for ASL (see ASL Status Codes section below)
AB Setup Input Wait
AC Reserved for ASL (see ASL Status Codes section below)
AD Ready To Boot event
AE Legacy Boot event
AF Exit Boot Services event
B0 Runtime Set Virtual Address MAP Begin
B1 Runtime Set Virtual Address MAP End
B2 Legacy Option ROM Initialization
B3 System Reset
B4 USB hot plug
B5 PCI bus hot plug
B6 Clean-up of NVRAM
B7 Configuration Reset (reset of NVRAM settings)
B8– BF Reserved for future AMI codes
D0 CPU initialization error
D1 System Agent initialization error
D2 PCH initialization error
D3 Some of the Architectural Protocols are not available
D4 PCI resource allocation error. Out of Resources
D5 No Space for Legacy Option ROM
D6 No Console Output Devices are found
D7 No Console Input Devices are found
D8 Invalid password
D9 Error loading Boot Option (LoadImage returned error)
DA Boot Option is failed (StartImage returned error)
DB Flash update is failed
DC Reset protocol is not available