User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Knowing BIOS
- 4.2 BIOS setup program
- 4.3 My Favorites
- 4.4 Main menu
- 4.5 Ai Tweaker menu
- 4.6 Advanced menu
- 4.6.1 Platform Misc Configuration
- 4.6.2 CPU Configuration
- 4.6.3 System Agent (SA) Configuration
- 4.6.4 PCH Configuration
- 4.6.5 PCH Storage Configuration
- 4.6.6 PCH-FW Configuration
- 4.6.7 PCI Subsystem Settings
- 4.6.8 USB Configuration
- 4.6.9 Network Stack Configuration
- 4.6.10 NVMe Configuration
- 4.6.11 Onboard Devices Configuration
- 4.6.12 APM Configuration
- 4.6.13 HDD/SSD SMART Information
- 4.7 Monitor menu
- 4.8 Boot menu
- 4.9 Tool menu
- 4.10 Exit menu
- 4.11 Updating BIOS
- Chapter 5: RAID Configuration
- Appendix
ASUS Pro E500 G7
4-45
Intel I219-LM LAN Controller
This item allows you to enable or disable the onboard NIC.
Conguration options: [Disabled] [Enabled]
Intel I225-LM LAN Controller
This item allows you to enable or disable the Intel LAN.
Conguration options: [Disabled] [Enabled]
Asmedia USB 3.2 Controller (Back 1A 1C)
Conguration options: [Disabled] [Enabled]
USB power delivery in Soft Off State (S5)
This item allows you to enable or disable USB power when your PC is in the S5 state.
Conguration options: [Disabled] [Enabled]
M.2_1 Configuration
[Auto] Auto-detects the M.2 device mode. If a SATA device is detected,
SATA6G_2 will be disabled.
[SATA mode] Only supports M.2 SATA devices. Please note that SATA6G_2 port cannot
be used in this mode.
[PCIE mode] Only supports M.2 PCIE devices.
PCIEX16_4 Configuration
[Auto] Enables SATA port 5 and port 6. PCIEX16_4 width is x2.
[x4 mode] Only supports PCIEX16_4. Please note that from SATA port 5 to port 8
cannot be used in this mode.
[Disabled] Supports all SATA device. Please note that PCIEX16_4 cannot be used in
this mode.
Serial Port Configuration
This submenu allows you to set parameters for Serial Port.
This item will only function if there is a serial port (COM) connector on your motherboard.
Serial Port
This item allows you to enable or disable the Serial port.
Conguration options: [On] [Off]
The following item appear only when Serial Port is set to [On].
Change settings
This item allows you to select an optimal setting for super IO device.
Conguration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4]
[IO=2E8h; IRQ=3]