User Manual

4-22
Chapter 4: BIOS Setup
Read Timing Centering 2D
Conguration options: [Enabled] [Disabled]
Command Voltage Centering
Conguration options: [Enabled] [Disabled]
Write Voltage Centering 2D
Conguration options: [Enabled] [Disabled]
Read Voltage Centering 2D
Conguration options: [Auto] [Enabled] [Disabled]
Late Command Training
Conguration options: [Auto] [Enabled] [Disabled]
Round Trip Latency
Conguration options: [Auto] [Enabled] [Disabled]
Turn Around Timing Training
Conguration options: [Enabled] [Disabled]
Rank Margin Tool
Conguration options: [Auto] [Enabled] [Disabled]
Margin Check Limit
Checks Margin to Limit to see if next boot memory needs to be retrained.
Conguration options: [Disabled] [L1] [L2] [Both]
The following item appears only when Margin Check Limit is set to [L2] or [Both].
Margin Limit Check L2
L2 check threshold is scale of L1 check.
Conguration options: [1] - [300]
Memory Test
Conguration options: [Enabled] [Disabled]
DIMM SPD Alias Test
Conguration options: [Enabled] [Disabled]
Receive Enable Centering 1D
Conguration options: [Enabled] [Disabled]
Retrain Margin Check
Conguration options: [Enabled] [Disabled]
CMD Drive Strength and Tx Equalization
Conguration options: [Auto] [Enabled] [Disabled]
CMD Slew Rate Training
Conguration options: [Auto] [Enabled] [Disabled]
Write Drive Strength Up/Dn independently
Conguration options: [Enabled] [Disabled]