User Manual

ASUS Pro E500 G7
4-25
DLLBwEn
Select values 2 to 4 for best memory overclocking.
Conguration options: [Auto] [0] - [7]
Legacy Mode
This item allows you to enable or disable to work around issues in Legacy Mode.
Conguration options: [Enabled] [Disabled]
SPD Write Disable
This item allows you to enable or disable setting the SPD Write Disable. For security
recommendations, SPD write disable must be set.
Conguration options: [TRUE] [FALSE]
Digi+ VRM
CPU Load-line Calibration
Load-line is dened by Intel
®
specication and affects CPU power voltage. The CPU
working voltage decreases proportionally to CPU loading. Higher load-line calibration
could get higher voltage and good overclocking performance, but increases the CPU
and VRM thermal conditions.
Conguration options [Auto] [Level 1] - [Level 7]
The actual performance boost may vary depending on your CPU specication.
DO NOT remove the thermal module. The thermal conditions should be monitored.
Synch ACDC Loadline with VRM Loadline
Enable this item to allow the VRM Loadline to be adjusted automatically to match the
AC/DC Loadline.
Conguration options: [Enabled] [Disabled]
CPU Current Capability
This item allows you to set the shut off current limit for external voltage regulator. A
higher setting will allow the voltage regulator to supply more current while a lower
setting will cause the voltage regulator to shut off the system when the supplied current
is higher than the set value.
Conguration options: [Auto] [100%] - [170%]
Congure higher values when overclocking or under a high loading for extra power support.
CPU VRM Switching Frequency
This item affects the VRM transient response speed and the component thermal
production. Select [Manual] to congure a higher frequency for a quicker transient
response speed.
Conguration options: [Auto] [Manual]
DO NOT remove the thermal module. The thermal conditions should be monitored.