Motherboard Pro H410T
E17153 Revised Edition v2 July 2020 Copyright © 2020 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Safety information....................................................................................................... iv About this guide........................................................................................................... v Package contents........................................................................................................ vi Pro H410T specifications summary..........................................................................
Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
About this guide This user guide contains the information you need when installing and configuring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product Introduction This chapter describes the features of the motherboard and the new technology it supports. It includes descriptions of the switches, jumpers, and connectors on the motherboard. • Chapter 2: BIOS Information This chapter tells how to boot into the BIOS.
Package contents Check your motherboard package for the following items. Motherboard 1 x Pro H410T motherboard Cables 1 x SATA power cable 2 x SATA 6Gb/s cables Miscellaneous 1 x Standard Mini-ITX I/O Shield 1 x Thin Mini ITX I/O Shield 1 x M.2 SSD Screw Package Application DVD 1 x Support DVD Documentation 1 x ACC Express Activation Key Card 1 x User manual If any of the above items is damaged or missing, contact your retailer.
Pro H410T specifications summary Ethernet 1 x Realtek RTL8111H 1Gb Ethernet ASUS LANGuard Rear USB (Total 4 ports) 2 x USB 3.2 Gen 1 ports (2 x Type-A) 2 x USB 2.0 ports (2 x Type-A) USB Front USB (Total 7 ports) 1 x USB 3.2 Gen 1 header supports additional 2 USB 3.2 Gen 1 ports 2 x USB 2.0 headers support additional 4 USB 2.0 ports 1 x USB 2.0 header supports additional 1 USB 2.0 port Realtek ALC887 7.
Pro H410T specifications summary Miscellaneous 1 x Chassis Intrusion header 1 x Clear CMOS header 1 x COM Port header 1 x Front Panel Audio header (AAFP) 1 x LPC Debug header Internal I/O Connectors 1 x LVDS connector 1 x M.
1 Product Introduction 1.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. 1.2 • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
1.2.1 Layout contents 1. CPU socket The motherboard comes with a surface mount Intel® Socket LGA1200 designed for 10th Gen Intel® CoreTM, Pentium® Gold and Celeron® Processors. For more details, refer to Central Processing Unit (CPU). 2. DDR4 DIMM slots The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed for DDR4 (Double Data Rate 4) memory modules. 3. Fan headers The Fan headers allow you to connect fans to cool the system.
8. USB 2.0 headers The USB 2.0 headers allow you to connect USB modules for additional USB 2.0 ports. The USB 2.0 headers provide data transfer speeds of up to 480 Mb/s. DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! The USB 2.0 module is purchased separately. PIN 1 Groud Data(positive) Data(negative) +5V DC NC GND USB_P7+ USB_P7USB+5V GND USB_P8+ USB_P8USB+5V PIN 1 9. RTC Battery header BATT_CON VBAT GND This connector is for the lithium CMOS battery.
13. COM Port header This header is for a serial (COM) port. Connect the serial port module cable to this header, then install the module to a slot opening at the back of the system chassis. COM RI RTS GND TXD DCD CTS DSR DTR RXD PIN 1 14. DMIC connector The DMIC connector is for connecting the digital microphone module used in All-in-One chassis. We recommend that you connect a high-definition front panel audio module to this header to avail of the motherboard’s highdefinition audio capability.
21. SATA power connector This connector is for the SATA power cable. The power cable plug is designed to fit this connector in only one orientation. Find the proper orientation and push down firmly until the connector completely fit. To provide power to your SATA device, connect the SATA power cable to this connector. 22. Speaker header SPEAKER +5V GND GND Speaker Out The 4-pin header is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings. PIN 1 23.
26.
1.2.2 Rear panel connectors 1 1. 2 3 4 5 6 7 8 DC power connector. Insert the power adapter into this port. • Supports both 19V and 12V DC input. • The power adapter is purchased separately. • Use the appropriate DC power adapter for the following scenarios: - Use a 90W adapter when a 35W CPU is installed on the system. - Use a 120W adapter when using your system with an LVDS panel. - Use a high-rated adapter (above 120W) when a 65W CPU is installed on the system. 2. HDMITM port.
7. Line Out port (lime). This port connects to a headphone or a speaker. 8. Microphone port (pink). This port connects a microphone. Refer to the audio configuration table below for the function of the audio ports in 2, 4, 5.1, or 7.1-channel configuration. Audio 2, 4, 5.1 or 7.1-channel configuration Port Line Ourt (Rear panel) MIC(Rear panel) Headphone (Front panel) MIC (Front panel) Headset 2-channel Front Speaker Out MIC 4-channel 5.1-channel 7.
1.3 Central Processing Unit (CPU) This motherboard comes with a surface mount Intel® Socket LGA1200 designed for 10th Gen Intel® Core™, Pentium® Gold and Celeron® Processors. Unplug all power cables before installing the CPU. • Ensure that you install the correct CPU designed for the LGA1200 socket only. DO NOT install a CPU designed for LGA1150, LGA1151, LGA1155 and LGA1156 sockets on the LGA1200 socket.
1.4 System memory This motherboard comes with two Double Data Rate 4 (DDR4) Small Outline Dual Inline Memory Module (SO-DIMM) sockets. The figure illustrates the location of the DDR4 DIMM sockets: DIMM_B1* DIMM_A1* • • • Channel Sockets Channel A DIMM_A1* Channel B DIMM_B1* You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration.
BIOS Information 2 ASUS Self-Recovering BIOS ASUS-exclusive BIOS protection technology automatically recovers the system’s BIOS with a verified backup in the event of an update failure, preventing the need to replace or reinstall your hardware.
2.2 • The BIOS Setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen. • Visit the ASUS website at www.asus.com to download the latest BIOS file for this motherboard. • If the system becomes unstable after changing any BIOS setting, load the default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu or press hotkey F5.
2.3 Event Log You can access Event Log from the Tool menu. Main Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc. Ai Tweaker Advanced Monitor Boot Tool Exit Start ASUS EZFlash ASUS SPD Information Event Log Show Event Logs in setup. :Select Screen : Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F5: Optimized Defaults F10: Save & Exit ESC: Exit Version 2.20.1276 Copyright (C) 2020 American Megatrends, Inc.
2.4 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. Main Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc. Ai Tweaker Advanced Monitor Boot Tool Exit Load Optimized Defaults Save Changes & Reset Discard Changes & Exit Launch EFI Shell from USB drives Exit system setup without saving any changes. :Select Screen : Select Item Enter: Select +/-: Change Opt.
Appendix Notices FCC Compliance Information Responsible Party: Address: Phone / Fax No: Asus Computer International 48720 Kato Rd., Fremont, CA 94538, USA (510)739-3777 / (510)608-4555 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Google™ License Terms Copyright© 2020 Google Inc. All Rights Reserved. Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at: http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions. DO NOT throw the motherboard in municipal waste.
English ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at: www.asus.com/support Français AsusTek Computer Inc. déclare par la présente que cet appareil est conforme aux critères essentiels et autres clauses pertinentes des directives concernées. La déclaration de conformité de l’UE peut être téléchargée à partir du site Internet suivant : www.
ASUS contact information ASUSTeK COMPUTER INC. Address Telephone Fax Web site Technical Support Telephone Online support 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan +886-2-2894-3447 +886-2-2890-7798 https://www.asus.com +86-21-38429911 https://qr.asus.com/techserv ASUS COMPUTER INTERNATIONAL (America) Address 48720 Kato Rd., Fremont, CA 94538, USA Telephone +1-510-739-3777 Fax +1-510-608-4555 Web site https://www.asus.
