User Manual

1-2
Chapter 1: Product Introduction
1.2.1 Layout contents
1. CPU socket
The motherboard comes with a surface mount Intel
®
Socket LGA1200 designed for 10
th
Gen
Intel
®
Core
TM
, Pentium
®
Gold and Celeron
®
Processors.
For more details, refer to Central Processing Unit (CPU).
2. DDR4 DIMM slots
The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed for DDR4
(Double Data Rate 4) memory modules.
For more details, refer to System memory.
3. Fan headers
The Fan headers allow you to connect fans to cool the system.
4. Internal DC power connector
This connector is for a DC power supply. The plug from the power supply is designed to t
this connector in only one orientation. Find the proper orientation and push down rmly until
the connector completely ts.
This connector supports 12V and 19V by models. Refer to the specication sheet of the
model for details.
5. M.2 slot (key M)
The M.2 slot allows you to install a M.2 device such as a M.2 SSD module.
M.2 slot (Key M), type 2260/2280 (supports PCIe 3.0 x4 & SATA modes)
6. SATA 6Gb/s ports
The SATA 6Gb/s ports allow you to connect SATA devices such as optical disc drives and
hard disk drives via a SATA cable.
7. USB 3.2 Gen 1 header
The USB 3.2 Gen 1 header allows you to connect a USB 3.2 Gen
1 module for additional USB 3.2 Gen 1 ports. The USB 3.2 Gen 1
header provides data transfer speeds of up to 5 Gb/s.
The USB 3.2 Gen 1 module is purchased separately.
PIN 1
IntA_P2_D+ IntA_P2_D- GND IntA_P2_SSTX+ IntA_P2_SSTX- GND IntA_P2_SSRX+ IntA_P2_SSRX- USB3+5V
GND
IntA_P1_D+
IntA_P1_D-
GND
IntA_P1_SSTX+
IntA_P1_SSTX-
GND
IntA_P1_SSRX+
IntA_P1_SSRX-
USB3+5V
GND FAN PWR FAN IN FAN PWM
FAN PWM
FAN IN
FAN PWR
GND