User’s Manual

Motherboard User Manual
1-1
Chapter 1
Product Introduction
1
Chapter 1: Product Introduction
Unplug the power cord from the wall socket before touching any component.
Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.
Hold components by the edges to avoid touching the ICs on them.
Whenever you uninstall any component, place it on a grounded antistatic pad or in
the bag that came with the component.
Before you install or remove any component, ensure that the power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, or components.
The pin definitions in this chapter are for reference only. The pin names depend on
the location of the header/jumper/connector.
The illustrations for this chapter are for reference only. The WiFi module is only
available on selected models.
1.1 Before you proceed
Take note of the following precautions before you install motherboard components or
change any motherboard settings.