User’s Manual

1-12
Chapter 1: Product Introduction
Chapter 1
14. BMC header
The BMC header allows you to connect and support an IPMI card.
BMC_HEADER
For more information on the installation and information regarding the IPMI card, please
visit www.asus.com.
15. Chassis Intrusion header
The Chassis Intrusion header allows you to connect a intrusion sensor or microswitch
for the chassis intrusion detection feature. When you remove any chassis component,
the sensor or microswitch triggers and sends a high level signal and records a chassis
intrusion event.
CHASSIS
By default, a jumper cap that disables the intrusion detection feature is installed on the
header to prevent accidental triggers.
16. COM Port connector
The COM (Serial) Port connector allows you to connect a COM port module. Connect
the COM port module cable to this connector, then install the module to a slot opening
on the system chassis.
COM
17. FlexKey button (Reset)
Press the FlexKey button to reboot the system. You may also configure the button and
assign a quick access feature such as activating Safe Boot to the button.
FLEXKEY