User Manual
Table Of Contents
- 1. UEFIとは
- 2. BIOS Setup Utility
- 3. BIOSの管理と更新
- 4. メニュー画面
- 5. Main
- 6. Ai Tweaker
- 7. Advanced
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 AMT Configuration
- 7.8 Thunderbolt(TM) Configuration
- 7.9 Trusted Computing
- 7.10 Redfish Host Interface Settings
- 7.11 Serial Port Console Redirection
- 7.12 Intel TXT Information
- 7.13 PCI Subsystem Settings
- 7.14 USB Configuration
- 7.15 Network Stack Configuration
- 7.16 NVMe Configuration
- 7.17 HDD/SSD SMART Information
- 7.18 APM Configuration
- 7.19 Onboard Devices Configuration
- 7.20 Intel(R) Rapid Storage Technology
- 8. Monitor
- 9. Boot
- 10. Tool
- 11. IPMI
- 12 Exit
Pro WS W680-ACE Series BIOSガイド
17
Ecient Core Ratio
高効率コア (Eコア) の動作倍率の同期方法を設定します。
[Auto] 自動的にすべての高効率コアの動作倍率を調整します。
[Sync All Cores] すべての高効率コアの動作倍率として動作倍率上限を設定します。
[By Core Usage] アクティブな高効率コア数に応じて動作倍率の上限を設定します。
次の項目は「Ecient Core Ratio」を [Sync All Cores] に設定した場合にのみ表示されま
す。
ALL-Core Ratio Limit
すべての高効率コアの動作倍率上限を設定します。CPUの既定値を使用する場合は、[auto] と
入力し <Enter> で決定します。
設定オプション: [Auto] [8] - [34]
次の項目は「Ecient Core Ratio」を [By Core Usage] に設定した場合にのみ表示されま
す。
Ecient 1-Core Ratio Limit / Ecient 2-Core Ratio Limit / Ecient 3-Core Ratio
Limit / Ecient 4-Core Ratio Limit
設定オプション: [Auto] [16] - [36]
AVX Related Controls
AVX2
Intel® Advanced Vector Extensions 2 (Intel® AVX2) 命令の有効/無効を設定します。
設定オプション: [Auto] [Disabled] [Enabled]
DRAM Timing Control
メモリーのアクセスタイミングに関する設定を行うことができます。既定値に戻すには、キーボー
ドで [auto] と入力し <Enter> で決定します。
メモリーのアクセスタイミングを変更するとシステムが不安定になる場合があります。不安定
になった場合は、既定値に戻してください。
Primary Timings
DRAM CAS# Latency
設定オプション: [Auto] [2] - [126]
DRAM RAS# to CAS# Delay
設定オプション: [Auto] [0] - [255]
DRAM RAS# PRE Time
設定オプション: [Auto] [0] - [255]