User Manual
Table Of Contents
- 1. UEFIとは
- 2. BIOS Setup Utility
- 3. BIOSの管理と更新
- 4. メニュー画面
- 5. Main
- 6. Ai Tweaker
- 7. Advanced
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 AMT Configuration
- 7.8 Thunderbolt(TM) Configuration
- 7.9 Trusted Computing
- 7.10 Redfish Host Interface Settings
- 7.11 Serial Port Console Redirection
- 7.12 Intel TXT Information
- 7.13 PCI Subsystem Settings
- 7.14 USB Configuration
- 7.15 Network Stack Configuration
- 7.16 NVMe Configuration
- 7.17 HDD/SSD SMART Information
- 7.18 APM Configuration
- 7.19 Onboard Devices Configuration
- 7.20 Intel(R) Rapid Storage Technology
- 8. Monitor
- 9. Boot
- 10. Tool
- 11. IPMI
- 12 Exit
18
Pro WS W680-ACE Series BIOSガイド
DRAM RAS# ACT Time
設定オプション: [Auto] [1] - [511]
DRAM Command Rate
設定オプション: [Auto] [1N] [2N] [3N] [N:1]
次 の 項 目 は「 DRAM Command Rate」を [N:1] に設定した場合にのみ表示されます。
N to 1 ratio
各 有 効 な コ マンド サイクル 間 の バ ブル 数 。
設定オプション: [1] - [7]
Secondary Timings
DRAM RAS# to RAS# Delay L
設定オプション: [Auto] [1] - [63]
DRAM RAS# to RAS# Delay S
設定オプション: [Auto] [1] - [127]
DRAM REF Cycle Time
設定オプション: [Auto] [1] - [65535]
DRAM REF Cycle Time 2
設定オプション: [Auto] [1] - [65535]
DRAM REF Cycle Time Same Bank
設定オプション: [Auto] [0] - [2047]
DRAM Refresh Interval
設定オプション: [Auto] [1] - [262143]
DRAM WRITE Recovery Time
設定オプション: [Auto] [1] - [234]
DRAM READ to PRE Time
設定オプション: [Auto] [1] - [255]
DRAM FOUR ACT WIN Time
設定オプション: [Auto] [1] - [511]
DRAM WRITE to READ Delay
設定オプション: [Auto] [1] - [31]
DRAM WRITE to READ Delay L
設定オプション: [Auto] [1] - [31]
DRAM WRITE to READ Delay S
設定オプション: [Auto] [1] - [31]
DRAM CKE Minimum Pulse Width
設定オプション: [Auto] [0] - [127]
DRAM Write Latency
設定オプション: [Auto] [1] - [255]