User Manual
Table Of Contents
- 1. UEFIとは
- 2. BIOS Setup Utility
- 3. BIOSの管理と更新
- 4. メニュー画面
- 5. Main
- 6. Ai Tweaker
- 7. Advanced
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 AMT Configuration
- 7.8 Thunderbolt(TM) Configuration
- 7.9 Trusted Computing
- 7.10 Redfish Host Interface Settings
- 7.11 Serial Port Console Redirection
- 7.12 Intel TXT Information
- 7.13 PCI Subsystem Settings
- 7.14 USB Configuration
- 7.15 Network Stack Configuration
- 7.16 NVMe Configuration
- 7.17 HDD/SSD SMART Information
- 7.18 APM Configuration
- 7.19 Onboard Devices Configuration
- 7.20 Intel(R) Rapid Storage Technology
- 8. Monitor
- 9. Boot
- 10. Tool
- 11. IPMI
- 12 Exit
48
Pro WS W680-ACE Series BIOSガイド
OCR Https Boot
One Click Recovery Https Bootの有効/無効を設定します。
設定オプション: [Disabled] [Enabled]
OCR PBA Boot
One Click Recovery PBA Bootの有効/無効を設定します。
設定オプション: [Disabled] [Enabled]
OCR Windows Recovery Boot
One Click Recovery Windows Recovery Bootの有効/無効を設定します。
設定オプション: [Disabled] [Enabled]
OCR Disable Secure Boot
Intel® Converged Security and Management Engine (CSME) がOne Click Recoveryのた
めにSecure Bootの無効化を要求可能にする機能の有効/無効を設定します。
設定オプション: [Disabled] [Enabled]
7.8 Thunderbolt(TM) Conguration
Thunderbolt™ に関する設定をすることができます。
PCIE Tunneling over USB4
U S B 4 経 由 で の P C I eトン ネリング の 有 効 / 無 効 を 設 定し ま す。
設定オプション: [Disabled] [Enabled]
Discrete Thunderbolt(TM) Support
ディスクリートThunderbolt™ サポートの有効/無効を設定します。
設定オプション: [Disabled] [Enabled]
• DMA保護機能をサポートするには、System Agent (SA) Conguration > Control
Iommu Pre-boot Behavior を[ Enable IOMMU during boot]に 設 定 し て く だ さ い 。
• 次の項目は「Discrete Thunderbolt(TM) Support」を[ Enabled]に 設 定 し た 場 合 に の
み表示されます。
Wake From Thunderbolt(TM) Devices
Thunderbolt™ デバイスからのシステム起動の有効/無効を設定します。
設定オプション: [Disabled] [Enabled]
Discrete Thunderbolt(TM) Conguration
ディスクリートThunderbolt™ に関する設定をすることができます。
DTBT Go2Sx Command
システムがSxへ移行している間にディスクリートThunderboltをSxステートにする機能の
有 効 / 無 効 を 設 定します。
設定オプション: [Disabled] [Enabled]