使用手冊 Motherboard Pro WS W790ESAGE SE
T22125 第二版 2023 年 5 月發行 版權說明 © ASUSTeK Computer Inc. All rights reserved.
目錄 安全性須知..........................................................................................................................................v 限用物質名稱及含量列表............................................................................................................ vi 關於這本使用手冊.........................................................................................................................vii Pro WS W790E-SAGE SE 規格列表...................................................................................
目錄 第三章:BIOS 程式設定與 RAID 支援 3.1 3.2 3.3 3.4 3.5 認識 BIOS 程式..................................................................................................................... 3-1 BIOS 設定程式....................................................................................................................... 3-2 華碩 EZ Flash 公用程式.................................................................................................... 3-3 華碩 CrashFree BIOS 3............................................................
安全性須知 電氣方面的安全性 • 為避免可能的電擊造成嚴重損害,在搬動電腦主機之前,請先將電腦電源線暫時 從電源插槽中拔掉。 • 當您要加入硬體裝置到系統中時,請務必先連接該裝置的訊號線,然後再連接電 源線。可能的話,在安裝硬體裝置之前先拔掉電腦的電源供應器電源線。 • 當您要從主機板連接或拔除任何的訊號線之前,請確定所有的電源線已事先拔 掉。 • 在使用介面卡或擴充卡之前,我們建議您可以先尋求專業人士的協助。這些裝置 有可能會干擾接地的迴路。 • 請確定電源供應器的電壓設定已調整到本國/本區域所使用的電壓標準值。若您不 確定您所屬區域的供應電壓值為何,請就近詢問當地的電力公司人員。 • 如果電源供應器已損壞,請不要嘗試自行修復。請將之交給專業技術服務人員或 經銷商來處理。 操作方面的安全性 • 在您安裝主機板以及加入硬體裝置之前,請務必詳加閱讀本手冊所提供的相關資 訊。 • 在使用產品之前,請確定所有的排線、電源線都已正確地連接好。若您發現有任 何重大的瑕疵,請儘速聯絡您的經銷商。 • 為避免發生電氣短路情形,請務必將所有沒用到的螺絲、迴紋針及其他零件收 好,不要遺留在主機板上或電腦主機中。 • 灰塵、濕
限用物質名稱及含量列表 限用物質及其化學符號 單元 鉛 (Pb) 汞 (Hg) 鎘 (Cd) 六價鉻 多溴聯苯 多溴二苯醚 (Cr+6) (PBB) (PBDE) 印刷電路板 ─ ○ ○ ○ ○ ○ 電子組件 ─ ○ ○ ○ ○ ○ 連接器 ─ ○ ○ ○ ○ ○ 其他及其配件 ─ ○ ○ ○ ○ ○ 備考 1. "○" 係指該項限用物質之百分比含量未超出百分比含量基準值。 備考 2.
關於這本使用手冊 產品使用手冊包含了所有當您在安裝主機板時所需用到的資訊。 使用手冊的編排方式 使用手冊是由下面幾個章節所組成: • 第一章:產品介紹 您可以在本章節中發現諸多華碩賦予本主機板的優異特色以及所有能夠應用在 本主機板的新產品技術。詳細內容有:主機板上的內建開關、跳線選擇區以及連 接埠。 • 第二章:硬體裝置資訊 本章節描述所有您在安裝系統元件時必須完成的硬體安裝程序。 • 第三章:BIOS 程式設定與 RAID 支援 本章節描述如何使用 BIOS 程式設定、透過 EZ Flash Utility 更新 BIOS 與 RAID 支援。 提示符號 為了能夠確保您正確地完成主機板設定,請務必注意下面這些會在本手冊中出現的 標示符號所代表的特殊含意。 小心: 提醒您在進行某一項工作時要注意勿傷害到電腦主機板元件與注意 您自身的安全。 重要: 此符號表示您必須要遵照手冊所描述之方式完成一項或多項軟硬體 的安裝或設定。 注意:提供有助於完成某項工作的訣竅和其他額外的資訊。 哪裡可以找到更多的產品資訊 您可以經由下面所提供的兩個管道來獲得您所使用的華碩產品資訊以及軟硬體的升 級資訊等。 1.
請注意! 本產品享有三年產品保固期,倘若自行撕毀或更換原廠保固序號標籤,即取消保 固權益,且不予提供維修服務。 華碩的連絡資訊 華碩電腦股份有限公司 ASUSTeK COMPUTER INC. 地址:112 台北市北投區立德路 15 號 1F ASUS COMPUTER INTERNATIONAL(美國) 地址:48720 Kato Rd., Fremont, CA 94538, USA ASUS COMPUTER GmbH(德國與奧地利) 地址:Harkortstrasse 21-23, 40880 Ratingen, Germany 服務與支援 請造訪 https://www.asus.
Pro WS W790E-SAGE SE 規格列表 CPU 支援採用 Intel® Socket LGA4677 規格插槽的 Xeon® W-3400 與 W-2400 處理器* 支援 Intel® Turbo Boost Max Technology 3.0 技術 * 處理器支援列表請造訪華碩網站 www.asus.com/tw/ 查詢。 晶片組 Intel® W790 晶片 記憶體 8 x 記憶體插槽,支援最高 2048GB DDR5 4800 ECC R-DIMM 記憶體模組* 支援八通道記憶體架構 支援 Intel® Extreme Memory Profile(XMP)技術 * 顯示卡 支援的記憶體模組類型、資料傳輸速度與記憶體模組數量會依處理 器與記憶體設定而異,詳細處理器/記憶體支援列表請參考 www.asus. com/tw/。 1 x VGA 連接埠來自 AST2600 Intel® Xeon® 7 x PCIe 5.0 Intel® Xeon® 4 x PCIe 5.
Pro WS W790E-SAGE SE 規格列表 USB 音效 前側面板 USB 連接埠(共 7 埠) - 1 x USB 3.2 Gen 2 接頭(支援 USB Type-C®) - 1 x USB 3.2 Gen 1 接頭,可擴充 2 組外接式 USB 3.2 Gen 1 連接埠 - 2 x USB 2.0 接頭,可擴充 4 組外接式 USB 2.0 連接埠 Realtek S1220A 高傳真 7.
Pro WS W790E-SAGE SE 規格列表 內建 I/O 裝置連接埠 儲存相關 3 x M.2 插槽(Key M) 2 x SlimSAS 插槽 8 x SATA 6Gb/s 連接埠 1 x VROC Key 排針 USB 1 x USB 3.2 Gen 2 接頭(支援 USB Type-C®) 1 x USB 3.2 Gen 1 接頭,可擴充 2 組外接式 USB 3.2 Gen 1 連 接埠 2 x USB 2.0 接頭,可擴充 4 組外接式 USB 2.0 連接埠 其他 1 x COM 接頭 1 x FlexKey 按鈕 1 x 前面板音效接頭(AAFP) 1 x LN2 模式跳線帽 1 x M.
Pro WS W790E-SAGE SE 規格列表 特殊功能 Extreme Engine Digi+ - 10K 黑色金屬固態電容 - MicroFine Alloy Choke 華碩 5X PROTECTION III - DIGI+ VRM(數位電源設計) - ESD Guards - LANGuard - 過壓保護 - Safeslot - 不鏽鋼 I/O 背板 華碩 Q-Design - M.2 Q-Latch - Q-Code - Q-Connector - Q-DIMM - Q-LED(處理器 [紅色]、記憶體 [黃色]、顯示卡 [白色]、開 機裝置指示燈 [黃綠色]) - Q-Slot 華碩散熱方案 - M.2 散熱背板 - M.
Pro WS W790E-SAGE SE 規格列表 軟體功能 ASUS 遊戲功能 Armoury Crate - Fan Xpert 4 AI Suite 3 - TPU - DIGI+ VRM - Turbo app - PC Cleaner 華碩 CPU-Z 支援 IT 管理軟體 - 華碩 Control Center Express(ACCE) Norton 360 Deluxe防毒軟體(60 天免費試用版) WinRAR UEFI BIOS 華碩 EZ DIY - 華碩 CrashFree BIOS 3 - 華碩 EZ Flash 公用程式 FlexKey BIOS 功能 512 Mb Flash ROM、UEFI AMI BIOS 管理功能 WOL by PME、PXE(UEFI 模式) 支援作業系統 Windows® 11 Windows® 10 64 位元 主機板尺寸 EEB 型式 12 x 13 英吋(30.
具有共享頻寬的連接埠 A A A A A A A Intel® Xeon® W-3400 處理器 Intel® Xeon® W-2400 處理器 PCIEX16(G5)_1 x16 x16 PCIEX16(G5)_2 x16 - PCIEX16(G5)_3 x16 x16 PCIEX16(G5)_4 x16 - PCIEX16(G5)_5 x16 x16 PCIEX16(G5)_6 x8 - PCIEX16(G5)_7 x16 x16 說明 A 當您安裝多張顯示卡時,建議您將機殼風扇的排線連接至主機板上的機 殼風扇插座,以獲得更良好的散熱環境。 建議使用支援 7 張以上擴充卡插槽的機殼。 xiv
產品包裝 請檢查下面所列出的各項標準配件是否齊全。 主機板 1 x Pro WS W790E-SAGE SE 4 x SATA 6Gb/s 排線 排線 1 x 溫度感應線 1 x VRM 風扇支架 1 x Q-connector 1 x M.2 橡膠軟墊 其他 1 x M.2 背板橡膠軟墊 1 x 用於 M.
xvi
第一章:系統導覽 1 產品介紹 1.
1.
頁碼 中央處理器(CPU) 1-4 2. 系統記憶體 1-5 3. 擴充插槽 1-7 4. 風扇插槽 1-9 5. 電源插槽 1-10 6. M.2 插槽 1-11 7. Micro SD 記憶卡插槽 1-12 8. SATA 6GB/s 連接埠 1-13 9. SlimSAS 連接埠 1-13 10. USB 3.2 Gen 2 Type-C® 前面板連接插槽 1-14 11. USB 3.2 Gen 1 連接埠 1-14 12. USB 2.0 連接插槽 1-15 13. BMC 開關 1-15 14. BMC 溫度感應線連接排針 1-16 15. 序列埠排針 1-16 16. BMC LAN 固定 IP 開關 1-17 17. FlexKey 按鈕(Reset) 1-17 18. 前面板音效接頭 1-18 19. IPMI 開關 1-18 20. 指示燈接頭 1-19 21. LN2 模式跳線帽 1-19 22. Location 按鈕與指示燈接頭 1-20 23. M.
1.
2.
記憶體設定 您可以任意選擇使用 ECC DDR5 RDIMM 記憶體模組安裝至本主機板的記憶體插槽 上。 第一章 您可以在通道中安裝不同容量的記憶體模組,在雙通道設定中,系統會 偵測較低容量通道的記憶體容量。任何在較高容量通道的其他記憶體容 量,會被偵測為單通道模式執行。 • 預設的記憶體運作頻率是根據其 SPD(Serial Presence Detect)。在 預設狀態下,某些記憶體在超頻時的運作頻率可能會較供應商所標 示的數值為低。 • 在全負載(8 DIMMs)或超頻設定下,記憶體模組可能需要更佳的 冷卻系統以維持運作的穩定。 • 在本主機板請使用相同 CL(CAS-Latency 行位址控制器延遲時間) 值記憶體模組。為求最佳相容性,建議您安裝同廠牌、相同資料碼 (D/C)版本的記憶體模組。請先與供應商確認並購買正確的記憶體 模組。 • 請造訪華碩網站查詢最新記憶體供應商列表(QVL)。 1-6 第一章:產品介紹
3. 擴充插槽 Intel® Xeon® W-2400 處理器不支援 PCIEX16(G5)_2、PCIEX16(G5)_4、 PCIEX16(G5)_6、M.2_1 與 M.
PCIe x16 插槽中的 PCIe 分支與 M.2 設定 A. Intel® Xeon® W-3400 處理器 插槽說明 可辨別的 M.2 SSD 數量(個) 第一章 1 PCIEX16(G5)_1 4 (x4 + x4 + x4 + x4) 2 PCIEX16(G5)_2 4 (x4 + x4 + x4 + x4) 3 PCIEX16(G5)_3 4 (x4 + x4 + x4 + x4) 4 PCIEX16(G5)_4 4 (x4 + x4 + x4 + x4) 5 PCIEX16(G5)_5 4 (x4 + x4 + x4 + x4) 6 PCIEX16(G5)_6 2 (x4 + x4) 7 PCIEX16(G5)_7 4 (x4 + x4 + x4 + x4) B. Intel® Xeon® W-2400 處理器 插槽說明 可辨別的 M.
4.
5. 電源插槽 這些電源插槽用來連接主機板電源。電源所提供的連接插頭已經過特別設計, 只能以一個特定方向插入主機板上的電源插槽。找到正確的插入方向後,僅需穩 穩地將之套進插槽中即可。 第一章 建議安裝的一個或兩個電源供應器不同,請參考 2.1.
6. M.2 插槽 第一章 這些插槽用來安裝 M.2 SSD 模組。 • Intel® Xeon® W-3400 處理器** -M .2_1 插槽(Key M),支援 2242/2260/2280/22110 類型儲存裝 置(支援 PCIe 5.0 x4 模式) -M .2_2 插槽(Key M),支援 2242/2260/2280/22110 類型儲存裝 置(支援 PCIe 5.0 x4 模式) -安 裝 Intel® Xeon® W-2400 處理器時,M.2_1 與 M.2_2 插槽將會關 閉。 • Intel® W790 晶片組: -M .2_3 插槽(Key M),支援 2242/2260/2280/22110 類型儲存裝 置(支援 PCIe 4.0 x4) • Intel® VROC Technology 支援 PCIe RAID 0/1/5/10。VROC HW_Key 為 選購配備,請另行選購。 M.
7. MicroSD 記憶卡插槽 此插槽支援安裝 microSD 記憶卡 v2.00(SDHC) / v3.
8. SATA 6Gb/s 連接埠 第一章 這些插槽可支援使用 Serial ATA 6.0 Gb/s 排線來連接 Serial ATA 6Gb/s 硬碟。 若您安裝了 SATA 硬碟至 SATA6G_5-8 連接埠,您可以透過 Intel® VROC 與內建的 Intel® W790 晶片組來建立 RAID 0、RAID 1、RAID 5 與 RAID 10 磁碟陣列。 在建立 RAID 設定時,請參考 RAID 設定使用手冊(RAID Configuration Guide)的相關說明。您可以從華碩官網下載此手冊。 9. SlimSAS 連接埠 SlimSAS 連接埠可用以連接 PCIe 4.
10. USB 3.2 Gen 2 Type-C® 前面板連接插槽 這個插槽用來連接 USB 3.2 Gen 2 Type-C® 模組,可在前面板連接埠擴充 USB 3.2 Gen 2 Type-C® 模組。USB 3.2 Gen 2 Type-C® 的資料傳輸率最高可達 10 Gb/s 。 第一章 USB 3.2 Gen 2 Type-C® 模組為選購配備,請另行購買。 11. USB 3.2 Gen 1 連接埠 這個插槽用來連接 USB 3.2 Gen 1 模組,可在前面板或後側連接埠擴充 USB 3.2 Gen 1 模組。當您安裝 USB 3.2 Gen 1 模組,可以享受最高 5 Gb/s 資料傳輸 率。 USB 3.
12. USB 2.0 連接插槽 第一章 這些 USB 擴充套件排線插槽支援 USB 2.0 規格,將 USB 模組排線連接至本插 槽,然後將模組安裝到機殼後側面板中開放的插槽。這些 USB 插槽與 USB 2.0 規格相容,並支援傳輸速率最高達 480 Mb/s。 請勿將 1394 排線連接到 U S B 插槽上,這麼做可能會導致主機板的損 毀。 USB 2.0 模組為選購配備,請另行購買。 13.
14. BMC 溫度感應線連接排針 此排針為連接溫度感應線,可以讓您監控主機板重要元件和連接裝置的溫度。 連接 T 感應線並啟用 BMC_SW,可以讓您在 BIOS 與網頁介面中檢視感應器讀取 結果。 第一章 15.
16. BMC LAN 固定 IP 開關 第一章 當功能開啟時,本開關可以設定固定 IP(10.10.10.10)。 17.
18. 前面板音效接頭 這組音效外接排針供您連接到前面板的音效排線,除了讓您可以輕鬆地通過主 機前面板來控制音效輸入/輸出等功能,並且支援 HD Audio 音效標準。將前面板 音效輸出/輸入模組的連接排線之一端連接到這個插槽上。 第一章 建議您將支援高傳真(high definition)音效的前面板音效模組連接到這 組排針,如此才能獲得高傳真音效的功能。 19.
20. 指示燈接頭 第一章 這些指示燈接頭可以讓您將外部指示燈連接至訊息指示燈、L A N1 指示燈、 LAN2 指示燈。 • 網路狀態指示燈(2-pin LAN_LED1, LAN_LED2) 這些排針用於前面板 Gigabit 網路指示燈。 連接至此排針的指示燈會與相對應的網路埠同步。 • 訊息指示燈(2-pin MSG_LED) 這個 2-pin 排針用於連接訊息指示燈纜線,該纜線連接至前面板訊息指示燈。 當這個內建的指示燈亮起時,代表 BMC 偵測到一個異常事件。 21.
22. Location 按鈕與指示燈接頭 使用 Location 按鈕與指示燈接頭連接器可以連接前面板上的定位器按鈕與定位 器指示燈。此按鈕可查詢系統定位器的狀態,且當按下定位器按鈕時,指示燈會 亮起。 第一章 • 當連接至此接頭時,Location 按鈕可經由 BMC 控制。 • 連接至此接頭的 Location 指示燈會與 Location LED (LOC_LED) 同步 。 23. M.2 插槽(Key E) M.2 Wi-Fi 插槽可以安裝 M.2 Wi-Fi 模組(E-key,2230 類型;PCIe 介面)。 M.
24. 電源 SMBus 連接插座 第一章 您可以透過本組插座連接到電源系統管理匯流排(SMBus,System Management Bus)介面裝置來讀取電源訊息。裝置透過 SMBus 介面與 SMBus 主機與/或其他 SMBus 裝置進行通訊。 需要滿足 PMBus 規範的電源,且可能需要客製化的 BMC FW。請連絡華 碩以獲得更多支援。 25.
26. 安全啟動按鈕 此按鈕可以暫時應用安全設置值至 BIOS,並同時保留所有超頻設置值,以提 供您修改導致啟動失效的設置。在超頻或調整您的系統設置時,使用此按鈕。這 個安全啟動(Safe Boot)按鈕可以在任何時間按下,按下後便能強制將系統重新 啟動並進入 BIOS 安全模式。 第一章 27.
28.
29.
30. 溫度感應線連接排針 第一章 此插座為連接溫度感應線,可以讓您監控主機板重要元件和連接裝置的溫度。 連接溫度感應器排線,然後將感應器放置在這些裝置或主機板的元件上面,便可 進行偵測其溫度。 31.
32. VGA 開關 這個 VGA 開關可以開啟或關閉後側面板的 VGA 連接埠。 第一章 當您使用此 VGA 控制器設定時請確認 ATX 電源供應器已關閉或電源線 已從電源供應器拔除。 • 當安裝顯示卡至 PCI Express x16 插槽時,後側面板的 VGA 連接埠 仍會被啟動。 • 當此 VGA 控制器設定為關閉時,BMC 遠端搖控管理功能仍然可以 使用,但用戶端裝置將無法顯示。 • 關閉 BMC_SW 時,不論 VGA 開關的狀態,後側面板的 VGA 連接埠 將會被關閉。 33.
34.
• 每一個 CPU 中的 PCIe 插槽皆被歸類為自有的單獨 VMD Domain,而 PCIEX16(G5)_6、M.2_1 和 M.2_2 除外-這三個插槽構成了自己的 VMD Domain。若您想使用 CPU 中的 PCIe 插槽或 PCH 中的 PCIe 建立 Bootable RAID,您只能在單獨 VMD Domain 中執行,更多資訊請參考下表: 第一章 單獨 VMD Domain Bootable RAID PCIEX16(G5)_1 1 V PCIEX16(G5)_2 1 V PCIEX16(G5)_3 1 V PCIEX16(G5)_4 1 V PCIEX16(G5)_5 1 V PCIEX16(G5)_7 1 V 1 V 1 V PCIe 插槽 Data RAID 可跨越不同的 VMD Domain 建立 PCIEX16(G5)_6 M.2_1 M.2_2 PCH 的 PCIe(M.2_3、 SLIMSAS_1 與 SLIMSAS_2) 35.
36. Q 指示燈 第一章 Q 指示燈從主機板開機後依序檢視 CPU、記憶體、顯示卡與開機裝置狀態。當 發現錯誤時,在該項目旁的指示燈則會亮燈直到問題解決。 透過直覺的方式提供這項友善的設計,能在短短幾秒內找到問題點。實際 的原因將視情況而異。 37.
38. Location 指示燈 Loaction 指示燈可以幫助您在機房內迅速找到機台位置。 第一章 39.
40. 處理器錯誤指示燈 第一章 這個指示燈亮起時表示系統已經經歷一個無法挽救或災難性的錯誤,且無法繼 續運作。 41.
42.
第二章:硬體裝置資訊 硬體裝置資訊 2.1 建立您的電腦系統 2 本節圖示僅供參考。主機板的構造可能會隨著型號而有所不同,但是安 裝的步驟仍然是相同的。 2.1.
移除 P N P 蓋之後請小心 不要掉落任何東西於插槽 上,否則可能會損壞插槽 上的排針。 第二章 2-2 第二章:硬體裝置資訊
第二章 2.1.
2.1.3 安裝 M.2 支援的 M.2 類型會依主機板而異。 當 M.2 散熱器上的散熱墊損毀時,建議使用厚度 1.25mm 的散熱墊更換 。 • 以下圖示僅顯示單一 M.2 插槽的安裝步驟,若您欲將 M.2 安裝至另 一個 M.2 插槽,則其他 M.2 插槽的安裝步驟相同。 • 當移除或安裝本章節中提到的螺絲或螺絲支架時,請使用十字螺絲 起子。 • M.2 為選購配備,請另行購買。 第二章 1. 鬆開散熱器上的螺絲。 2.
安裝 M.2 至 M.2 插槽。安裝步驟會因 M.2 的長度而異,請參考以下的說明: • 安裝 M.2 至 M.2_1 與 M.2_2 插槽 22110 長度 A. 逆時針旋轉手柄,然後將其推向 M.2 插槽並將其從鎖孔中取出 ,以移除 2280 長度螺絲孔處預裝的 M.2 Q-latch。 B. 從散熱墊上移除塑膠薄膜。 C. 旋轉並調整 22110 位置的 M.2 Q-l a t c h 以使處理點指向遠離 M.2 插槽位置。 第二章 3. M.
D. (選擇性)當安裝單面 M.2 儲存裝置時,請安裝隨附的 M.2 背 板橡膠軟墊至 2260 M.2 長度螺絲孔。若安裝雙面 M.2 儲存裝 置時,請勿安裝 M.2 背板橡膠軟墊。 第二章 散熱墊 隨附的 M.2 背板橡膠軟墊 E. 安裝 M.2 儲存裝置至 M.2 插槽。 F. 順時針旋轉 M.2 Q-Latch 以將 M.
2280 長度 A. 旋轉並調整 2280 位置的 M.2 Q-latch 以使處理點指向遠離 M.2 插槽位置。 B. 從散熱墊上移除塑膠薄膜。 C. (選擇性)當安裝單面 M.2 儲存裝置時,請由 2260 M.2 位置 的螺絲孔上移除散熱墊,並安裝隨附的 M.2 背板橡膠軟墊。若 安裝雙面 M.2 儲存裝置時,請勿安裝 M.2 背板橡膠軟墊。 安裝 M.2 儲存裝置至 M.2 插槽。 E. 順時針旋轉 M.2 Q-Latch 以將 M.2 固定到位。 第二章 D. 散熱墊 隨附的 M.
2242 與 2260 長度 A. 逆時針旋轉手柄,然後將其推向 M.2 插槽並將其從鎖孔中取出 ,以移除 2280 長度螺絲孔處預裝的 M.2 Q-latch。 B. 從散熱墊上移除塑膠薄膜。 C. 請由要安裝 M.2 位置的螺絲孔上移除散熱墊,並安裝隨附的 M.2 Q-Latch。 D. 旋轉並調整 M.2 Q-Latch,使手柄遠離 M.2 插槽。 第二章 散熱墊 M.
E. (選擇性)當安裝單面 M.2 儲存裝置時,請由 2242 M.2 位置 的螺絲孔上移除散熱墊,並安裝隨附的 M.2 橡膠軟墊。若安裝 雙面 M.2 儲存裝置時,請勿安裝 M.2 背板橡膠軟墊。 當安裝單面 M.2 儲存裝置至 2260 類型時請依照步驟 E 進行。 安裝 M.2 儲存裝置至 M.2 插槽。 G. 順時針旋轉 M.2 Q-Latch 以將 M.2 固定到位。 第二章 F. 散熱墊 隨附的 M.
• 安裝 M.2 至 M.2_3 插槽 2280 與 22110 長度 A. (選擇性)移除已預先安裝在 2280 長度位置之螺絲孔上的 M.2 Q-Latch 螺絲。 當安裝 22110 類型至 M.2_3 時請依照步驟 A 進行。 B. (選擇性)當安裝單面 M.2 儲存裝置時,請安裝隨附的 M.2 橡 膠軟墊。若安裝雙面 M.2 儲存裝置時,請勿安裝 M.2 橡膠軟墊 。預設安裝的橡膠軟墊並不相容雙面 M.2 儲存裝置。 C. 旋轉並調整 M.2 Q-Latch,使手柄遠離 M.2 插槽。 D. 安裝 M.2 儲存裝置至 M.2 插槽。 E. 順時針旋轉 M.2 Q-Latch 以將 M.2 固定到位。 第二章 隨附的 M.
2242 與 2260 長度 A. (選擇性)移除 M.2 橡膠軟墊。 當安裝 M.2 至 2242 類型時請依照步驟 A 進行。 B. (選擇性)移除已預先安裝在 2280 長度位置之螺絲孔上的 M.2 Q-Latch 螺絲。 C. 安裝 M.2 Q-Latch 至要安裝的 M.2 位置的螺絲孔。 D. 旋轉並調整 M.2 Q-Latch,使手柄遠離 M.2 插槽。 安裝 M.2 儲存裝置至 M.2 插槽。 F. 順時針旋轉 M.2 Q-Latch 以將 M.2 固定到位。 第二章 E.
4. 從散熱器底部的散熱墊上移除塑膠膜。 當 M.2 散熱器上的散熱墊損毀時,建議使用厚度 1.25mm 的散熱墊更換 。 5. 裝回散熱器。 6.
2.1.
2.1.5 安裝主機板 將主機板放入機殼,並確認後側 I/O 連接埠對齊機殼的後側 I/O 面板。 2. 將 10 個螺絲放入主機板上的螺絲孔並旋轉鎖緊,以確保將主機板鎖至機殼。 第二章 1.
第二章 2.1.
第二章 PCIE_6P_PWR 連接埠可為 PCIe X16 插槽提供額外的電源。 2-16 第二章:硬體裝置資訊
安裝電源供應器時,請參考以下設定以免造成損壞。 安裝單一電源供應器 ATX_PWR(1) PCIE_8P(1)_PWR* ATX_12V(2)_1 PCIE_6P(1)_PWR* *連 接此電源連接器為選擇性的。如果您需要為 PCIe 擴展卡提供 額外的電源,您可以連接此電源連接器。 若您希望使用單一電源裝置,請確保電源供應器至少提供功率為 1500W 的電力。 Pro WS W790E-SAGE SE 主機板使用手冊 2-17 第二章 ATX_12V(1)_1
安裝兩個電源供應器 電源供應器 1 ATX_PWR(1) ATX_12V(1)_1 ATX_12V(1)_2 PCIE_8P(1)_PWR* PCIE_6P(1)_PWR* 第二章 *連 接此電源連接器為選擇性的。如果您需要為 PCIe 擴展卡提供 額外的電源,您可以連接此電源連接器。此電源連接器僅用於連 接電源供應器 1。 + 電源供應器 2 ATX_PWR(2) ATX_12V(2)_1 ATX_12V(2)_2 若您希望使用兩個電源裝置,請確保每個電源供應器至少提供功率為 750W 的電力,且兩個電源供應器須為相同品牌與型號。 2-18 第二章:硬體裝置資訊
2.1.7 安裝 SATA 裝置 第二章 或 2.1.
2.1.9 安裝前面板輸出/輸入連接埠 安裝 USB 3.2 Gen 2 Type-C® 連接插槽 安裝前面板連接插槽 USB 3.2 Gen 2 Type-C® 第二章 本插槽僅能以一個方向插入。請 將插頭壓入插槽直到卡入定位。 安裝 USB 3.2 Gen 1 連接插槽 安裝 USB 2.0 連接插槽 USB 2.0 USB 3.
2.1.
2.1.11 安裝 M.2 Wi-Fi 模組與行動天線 安裝 M.2 W-Fi 模組 2 1 4 第二章 3 • 請確認華碩 W-Fi 已經確實安裝至 Wi-Fi 連接埠。 5 • 請將天線與所有 人員保持至少 20 公分的距離。 • 左圖僅供參考。 I/O 連接埠可能會 依照您所購買的 型號而有不同, 但是W i-F i 天線 安裝程序適用於 任一型號。 • M.
2.2 BIOS 更新應用程式 BIOS FlashBack™ BIOS Flashback™ 讓您無需進入現有 BIOS 或作業系統即可輕鬆更新 BIOS。 使用 BIOS FlashBack™: 1. 造訪 https://www.asus.com/support/ 以下載適用於本主機板的最新 BIOS 版本。 2. 開啟 BIOSRenamer.exe 應用程式以自動將檔案重新命名,接著複製至 USB 儲存 裝置。 3. 將 24-pin 電源插槽連接至主機板,並確保主機板過電。將 USB 儲存裝置插入 BIOS Flashback™ 連接埠。 4. 按下主機板上的 BIOS Flashback™ 按鈕約 3 秒鐘直到 Flashback™ 指示燈閃爍 3 次,表示 BIOS Flashback™ 功能已經啟動。 BIOS FlashBack™ 按鈕 BIOS FlashBack™ 連接埠 5.
關於使用 BIOS FlashBack™ 功能的更多訊息,請造訪 https://www.asus.
2.3 主機板後側與音效連接埠 2.3.1 後側面板連接埠 1. Clear CMOS 按鈕(CLR_CMOS)。當系統因超頻而當機時,按下此鍵可清除 BIOS 設 定資訊。 2. Realtek 1Gb 網路控制器 3. Intel® 10Gb 網路連接埠 4. VGA 連接埠來自 AST2600 5. BIOS FlashBack™ 按鈕 6. USB 2.0 連接埠 11 與 12 7. USB 3.2 Gen 2 Type-A 連接埠 1 與 2 8. USB 3.2 Gen 2 Type-A 連接埠 3 與 4 9. USB 3.2 Gen 2 Type-C® 連接埠 C7 10. USB 3.2 Gen 2x2 Type-C® 連接埠 C6 11. 光纖 S/PDIF 輸出埠 12. 音效連接埠** * 與 **:請參考下頁表格中網路連接埠指示燈與音效連接埠的定義。 強烈建議您將裝置連接至適當傳輸速度的連接埠。例如 USB 3.2 Gen 1 裝置連接至 USB 3.
* Realtek 1Gb 網路指示燈之燈號說明 Activity 連線指示燈 ACT/LINK SPEED 指示燈 指示燈 SPEED 指示燈 燈號狀態 說明 燈號狀態 說明 熄滅 未連接 熄滅 10 Mbps 連線 橘燈 已連接 橘燈 100 Mbps 連線 閃爍 正在存取資料 綠燈 1 Gbps 連線 網路埠 * Intel® 10Gb 網路指示燈之燈號說明 ACT/LINK SPEED 指示燈 指示燈 第二章 Activity 連線指示燈 SPEED 指示燈 燈號狀態 說明 燈號狀態 說明 熄滅 未連接 熄滅 未連接 綠燈 已連接 綠燈 連線速度 10 Gbps 閃爍 正在存取資 料 橘燈 5 Gbps/ 2.5 Gbps/ 1Gbps/ 100 Mbps 連線 網路埠 ** 2、4、5.1 或 7.1 聲道音效設定 接頭 2 聲道 4 聲道 5.1 聲道 7.
2.3.
連接 5.1 聲道喇叭 第二章 連接 7.
2.4 第一次啟動電腦 1. 確認所有排線與接腳都接妥,然後蓋上機殼的外蓋。 2. 確定所有的開關都已關閉。 3. 將電源線接上機殼背面的電輸入插座。 4. 情況許可的話,最好將電源線路上加接突波吸收/保護器。 5. 您可以先開啟以下周邊的電源: 顯示器 b. 外接式 SCSI 接頭周邊裝置(從串連的最後端開始) c. 系統電源 送電之後,機殼面板上應該會有電源指示燈亮起才對。如果是使用 ATX 電源的 話,必須等到面板按鈕被觸碰後才會啟動電源,電源指示燈此時才會亮起。如果 您的電腦符合綠色省電標準,已隨時準備可以進入省電模式的話,顯示器指示燈 也會亮起。 系統會開始執行開機自我檢測(POST),此時會聽見 BIOS 嗶聲或其他訊息顯示 於畫面上。如果送電之後超過 30 秒而畫面未有動靜的話,表示電腦的設定尚有 問題存在,請再進一步地的檢查各項動作,如果還是不行,就需要向廠商求助了 ! 7.
第二章 2-30 第二章:硬體裝置資訊
第三章:BIOS 程式設定與 RAID 支援 BIOS 程式設定 與 RAID 支援 3 3.
3.
3.3 華碩 EZ Flash 公用程式 華碩 EZ Flash 公用程式讓您在未進入作業系統前即能輕鬆的更新 BIOS 程式。 請讀取出廠預設值來保持系統的穩定。請選擇 E x i t 選單中的 L o a d Optimized Defaults 項目或按下 鍵。 請依照以下步驟透過 USB 更新 BIOS 程式: • 本功能僅支援採用 FAT 32/16 格式的單一磁區 USB 隨身碟。 • 當更新 BIOS 時,請勿關閉或重置系統以避免系統開機失敗。 將儲存有最新的 BIOS 檔案的 USB 隨身碟插入 USB 連接埠。 2. 進入 BIOS 設定程式的 Advanced Mode,選擇 Tool > Start ASUS EzFlash,接著 請按下 鍵。 3. 按左方向鍵來切換至 Drive 區域。 4. 請利用上/下方向鍵找到存放有最新 B I O S 檔案的 U S B 隨身碟,接著請按下 鍵。 5. 按右方向鍵來切換至 Folder 區域。 6.
3.4 華碩 CrashFree BIOS 3 華碩最新自行研發的 CrashFree BIOS 3 工具程式,讓您在當 BIOS 程式和資料被病 毒入侵或毀損時,可以輕鬆從含有最新或原始 BIOS 檔案的 USB 隨身碟中回復 BIOS 程式的資料。 回復 BIOS 程式 請依照下列步驟回復 BIOS 程式: 1. 請造訪 https://www.asus.com/support/ 以下載此主機板最新的 BIOS 版本。 2. 開啟 BIOSRenamer.exe 應用程式以自動將檔案重新命名,接著複製至您的 USB 儲存裝置。 當您於相容 BIOS FlashBack™ 的主機板下載檔案時,BIOSRenamer.exe 應 用程式與您的 BIOS 檔案會一同壓縮。 3. 啟動系統。 4. 將含有最新或原始 BIOS 檔案的 USB 隨身碟插入 USB 連接埠。 5. 接著工具程式便會自動檢查儲存裝置中是否存有 BIOS 檔案。當搜尋到 BIOS 檔 案後,工具程式會開始讀取 BIOS 檔案並自動進入華碩 EZ Flash 3 程式。 6.
3.5 RAID 功能設定 本主機板支援 RAID 設定。 更多關於 RAID 的設定,請至華碩官網 https:// www.asus.
第三章 3-1 第三章:BIOS 程式設定與 RAID 支援
附錄 附錄 第三章 Pro WS W790E-SAGE SE 架構圖(W-3400 CPU) Pro WS W790E-SAGE SE 主機板使用手冊 A-1
Pro WS W790E-SAGE SE 架構圖(W-2400 CPU) 第三章 A-2 第三章:BIOS 程式設定與 RAID 支援
Code Description 00 Not used 01 Power on. Reset type detection (soft/hard).
Q-Code 列表 第三章 Code Description E0 S3 Resume is stared (S3 Resume PPI is called by the DXE IPL) E1 S3 Boot Script execution E2 Video repost E3 OS S3 wake vector call E4 – E7 Reserved for future AMI progress codes E8 S3 Resume Failed E9 S3 Resume PPI not Found EA S3 Resume Boot Script Error EB S3 OS Wake Error EC – EF Reserved for future AMI error codes F0 Recovery condition triggered by firmware (Auto recovery) F1 Recovery condition triggered by user (Forced recovery) F2 Recovery
Code Description 90 Boot Device Selection (BDS) phase is started 91 Driver connecting is started 92 PCI Bus initialization is started 93 PCI Bus Hot Plug Controller Initialization 94 PCI Bus Enumeration 95 PCI Bus Request Resources 96 PCI Bus Assign Resources 97 Console Output devices connect 98 Console input devices connect 99 Super IO Initialization 9A USB initialization is started 9B USB Reset 9C USB Detect 9D USB Enable 9E – 9F Reserved for future AMI codes A0 IDE initia
Q-Code 列表 Code Description B4 USB hot plug B5 PCI bus hot plug B6 Clean-up of NVRAM B7 Configuration Reset (reset of NVRAM settings) B8– BF Reserved for future AMI codes D0 CPU initialization error D1 System Agent initialization error D2 PCH initialization error D3 Some of the Architectural Protocols are not available D4 PCI resource allocation error.