User Manual
Table Of Contents
- 1. UEFIとは
- 2. BIOS Setup Utility
- 3. BIOSの管理と更新
- 4. メニュー画面
- 5. Main
- 6. Ai Tweaker
- 7. Advanced
- 7.1 Trusted Computing
- 7.2 AMD fTPM configuration
- 7.3 Redfish Host Interface Settings
- 7.4 UEFI Variables Protection
- 7.5 Serial Port Console Redirection
- 7.6 CPU Configuration
- 7.7 PCI Subsystem Settings
- 7.8 USB Configuration
- 7.9 Network Stack Configuration
- 7.10 NVMe Configuration
- 7.11 HDD/SSD SMART Information
- 7.12 SATA Configuration
- 7.13 APM Configuration
- 7.14 Onboard Devices Configuration
- 7.15 PCIe Redriver Tuning
- 7.16 AMD Mem Configuration Status
- 7.17 AMD PBS
- 7.18 AMD Overclocking
- 7.19 AMD CBS
- 7.20 Third-party UEFI driver configurations
- 8. Monitor
- 9. Boot
- 10. Tool
- 11. Server Mgmt
- 12. Exit
70
Pro WS sTR5 Series BIOSガイド
REP-MOV/STOS Streaming
REP-MOV/STOSストリーミングサポートの有効/無 効を設 定します。
設定オプション: [Disabled] [Enabled] [Auto]
Streaming Stores Control
Streaming Stores機能の有効/無効を設定します。
設定オプション: [Disabled] [Enabled] [Auto]
Local APIC Mode
ローカルAPICの動作モードを設定します。
設定オプション: [Compatibility] [xAPIC] [x2APIC] [Auto]
ACPI _CST C1 Declaration
C1ステートをOSに宣言する機能の有効/無効を設定します。
設定オプション: [Disabled] [Enabled] [Auto]
MCA error thresh enable
MCAエラーしきい値の有効/無効を設定します。
設定オプション: [False] [True] [Auto]
次 の 項 目 は「 MCA error thresh enable」を [True] に設定した場合にのみ表示されます。
MCA error thresh count
有効なエラーしきい値 = 4095(0xFFF) - MCA error thresh count (例: 既定値の0xFF5で
は 、し き い 値 は 1 0 に な り ま す )
設定オプション: [1] - [4095]
MCA FruText
MCA FruTextの有効/無効を設定します。
設定オプション: [False] [True]
SMU and PSP Debug Mode
この項目が有効に設定されている場合、コールドリセットの原因となるPSP FWまたはSMU
FWによって検出された未修正のエラーがハングしシステムは再起動しません。
設定オプション: [Disabled] [Enabled] [Auto]
PPIN Opt-in
PPIN機能の有効/無効を設定します。
設定オプション: [Disabled] [Enabled] [Auto]
SNP Memory (RMP Table) Coverage
この項目が有効に設定されている場合、ENTIEシステムメモリーがカバーされます。
設定オプション: [Disabled] [Enabled] [Custom] [Auto]
次 の 項 目 は「 SNP Memory (RMP Table) Coverage」を [Custom] に設定した場合にのみ表
示さ れ ま す。
Amount of Memory to Cover
対象となるシステムメモリーのMBを16進数で指定します。
設定オプション: [0] - [100000]
SMEE
Secure Memory Encryption (SME) の有効/無効を設定します。
設定オプション: [Disable] [Enable] [Auto]