User’s Manual

Motherboard User Manual
1-11
Chapter 1
Header Max. Current Max. Power Default Speed Shared Control
CPU_FAN 3A 36W Q-Fan Controlled A
CPU_OPT 3A 36W Q-Fan Controlled A
CHA_FAN1 3A 36W Q-Fan Controlled -
CHA_FAN2 3A 36W Q-Fan Controlled -
CHA_FAN3 3A 36W Q-Fan Controlled -
CHA_FAN4 3A 36W Q-Fan Controlled -
CHA_FAN5 3A 36W Q-Fan Controlled -
W_PUMP+ 3A 36W Full Speed -
7. Power connectors
These Power connectors allow you to connect your motherboard to a power supply.
The power supply plugs are designed to fit in only one orientation, find the proper
orientation and push down firmly until the power supply plugs are fully inserted.
ATX_PWR
CPU_12V(1)_1
CPU_12V(2)_1
PCIE_8P(1)_PWR
PCIE_8P(2)_PWR
PCIE_CPU_12V_1
PCIE_CPU_12V_2
The recommended installation for a single and for double PSUs will differ, please refer to
the ATX power connection section for more information.
• We recommend that you use a PSU with a higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
• If you want to use two or more high-end PCI Express x16 cards, we recommend
using a PSU with 900W~1200W power or above to ensure the system stability.
When installing two or more graphics cards ensure to connect the PCIE_8P_PWR
connector(s). If the PCIE_8P_PWR connector(s) are not connected, a BIOS prompt will
appear and will remain until you have connected the PCIE_8P_PWR connector(s).