User’s Manual

1-18
Chapter 1: Product Introduction
Chapter 1
28. ProbeIt Measurement Points
The ProbeIt allows you to detect your system’s current voltage and OC settings using
a multimeter. You can also measure the ProbeIt points during overclocking.
ProbeIt
Using ProbeIt
Connect one of the probe onto the GND point on the motherboard. The GND point is
the screw hole located in the illustration below:
Then connect the other probe onto another ProbeIt point to measure the
corresponding voltage information.
The illustration above is for reference only, the actual motherboard layout and measure
points may differ by model.