User’s Manual

ASUS Pro WS X570-ACE
1-5
Node connector (12-1 pin NODE)
TheNodeconnectorallowsyoutoconnecta
compatiblePSUorcontrolacompatiblefan
extensioncard.
Visitwww.asus.comformoreinformationaboutthedevicesandthelatestcompatibility
list.
Thermal Sensor connector (2-pin T_SENSOR)
TheThermalSensorconnectorallowsyoutoconnecta
sensortomonitorthetemperatureofthedevicesandthe
critical components inside the motherboard. Connect the
thermalsensorandplaceitonthedeviceorthemotherboard’s
component to detect its temperature.
Clear RTC RAM (2-pin CLRTC)
ThisheaderallowsyoutocleartheCMOSRTCRAMdataof
thesystemsetupinformationsuchasdate,time,andsystem
passwords.
To erase the RTC RAM:
1. TurnOFFthecomputerandunplugthepowercord.
2. Useametalobjectsuchasascrewdrivertoshortthetwo
pins.
3. PlugthepowercordandturnONthecomputer.
4. Holddownthe<Del> key during the boot process and
enterBIOSsetuptore-enterdata.
CLRTC
+3V_BAT GND
PIN 1
Ifthestepsabovedonothelp,removetheonboardbatteryandshortthetwopinsagain
tocleartheCMOSRTCRAMdata.AfterclearingtheCMOS,reinstallthebattery.
Clear LAN Password (3-pin LAN_PWD)
ThisjumperallowsyoutocleartheLANpassword.
To erase the LAN Password:
1. TurnOFFthecomputerandunplugthepowercord.
2. Movethejumpercapfrompins1-2(default)to
pins2-3.Keepthecaponpins2-3forabout5-10
seconds,thenmovethecapbacktopins1-2.
3. PlugthepowercordandturnONthecomputer.
LAN_PWD
Clear
Password