User’s Manual

5-42 Chapter 5: Management Functions
3. Enter your new password into the
New password
field, and enter it again
into the
Confirm Password
field.
The password should be a minimum of 8 characters and should only consist of
uppercase characters, lowercase characters, and numbers.
4. Click
Save
once you are finished.
5. Restart the client device(s) once you have set the new password for the
changes to take effect.
5.4.3 Setting the password for RTL8117
You can set an encryption password for RTL8117 using this function.
1. Select the device(s) you would like to set the encryption password for.
2. Click on
Select function
>
8117 - Control
>
Set password
.
3. Enter the current password in the
Password
field, or you may check
Default
Password
to load a previously set password.
If no RTL8117 password was previously set, checking
Default Password
will
load the system’s default password.