User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- 2.1 Building your PC system
- 2.1.1 CPU installation
- 2.1.2 Cooling system installation
- 2.1.3 DIMM installation
- 2.1.4 M.2 installation
- 2.1.5 Motherboard installation
- 2.1.6 ATX power connection
- 2.1.7 SATA device connection
- 2.1.8 Front I/O connector
- 2.1.9 Expansion card installation
- 2.1.10 USB 3.2 Gen 2 Type-C® monitor connection
- 2.1.11 M.2 Wi-Fi module and antenna installation
- 2.2 BIOS update utility
- 2.3 Motherboard rear and audio connections
- 2.4 Starting up for the first time
- 2.5 Turning off the computer
- 2.1 Building your PC system
- Chapter 3: BIOS and RAID Support
- Appendix
ProArt B650-CREATOR
1-23
Chapter 1
19. Thunderbolt™ header
The Thunderbolt™ header allows you to connect an add-on Thunderbolt™ I/O
card that supports Intel®’s Thunderbolt™ Technology, allowing you to connect
Thunderbolt™-enabled devices to form a daisy-chain configuration.
• The add-on Thunderbolt™ I/O card and Thunderbolt™ cables are purchased
separately.
• Please visit the official website of your purchased Thunderbolt™ card for more details
on compatibility.
The Thunderbolt™ card can only be used when installed to the PCIEX16_3 slot. Ensure to
install your Thunderbolt™ card to the PCIEX16_3 slot.