User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- 2.1 Building your PC system
- 2.1.1 CPU installation
- 2.1.2 Cooling system installation
- 2.1.3 DIMM installation
- 2.1.4 M.2 installation
- 2.1.5 Motherboard installation
- 2.1.6 ATX power connection
- 2.1.7 SATA device connection
- 2.1.8 Front I/O connector
- 2.1.9 Expansion card installation
- 2.1.10 USB 3.2 Gen 2 Type-C® monitor connection
- 2.1.11 M.2 Wi-Fi module and antenna installation
- 2.2 BIOS update utility
- 2.3 Motherboard rear and audio connections
- 2.4 Starting up for the first time
- 2.5 Turning off the computer
- 2.1 Building your PC system
- Chapter 3: BIOS and RAID Support
- Appendix
ProArt B650-CREATOR
2-21
Chapter 2
2.1.10 USB 3.2 Gen 2 Type-C
®
monitor connection
DisplayPort IN
DisplayPort
Refer to section Rear I/O connection for
the location of the DisplayPort IN port.
Refer to the USB 3.2 Gen 2 Type-C
®
and DisplayPort configuration section on the next
page for more details on the configurations available using the DP IN and USB 3.2 Gen 2
Type-C
®
ports.
1. Connect the bundled ASUS DisplayPort
cable to the DisplayPort on a discrete
graphic card and to the DisplayPort IN port
on the motherboard.
USB 3.2 Gen 2 Type-C
®
port can be connected to any USB Type-C
®
compatible display
or device.
2. Connect a video capable USB Type-C
®
cable to the USB 3.2 Gen 2 Type-C
®
port
(USB 3.2 Gen 2 Type-C
®
C10) on the motherboard and to a monitor featuring a USB
Type-C
®
port.
Ensure to use a video capable USB Type-C
®
when connecting a monitor featuring a USB
Type-C
®
port.