User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- 2.1 Building your PC system
- 2.1.1 CPU installation
- 2.1.2 Cooling system installation
- 2.1.3 DIMM installation
- 2.1.4 M.2 installation
- 2.1.5 Motherboard installation
- 2.1.6 ATX power connection
- 2.1.7 SATA device connection
- 2.1.8 Front I/O connector
- 2.1.9 Expansion card installation
- 2.1.10 USB 3.2 Gen 2 Type-C® monitor connection
- 2.1.11 M.2 Wi-Fi module and antenna installation
- 2.2 BIOS update utility
- 2.3 Motherboard rear and audio connections
- 2.4 Starting up for the first time
- 2.5 Turning off the computer
- 2.1 Building your PC system
- Chapter 3: BIOS and RAID Support
- Appendix
2-22
Chapter 2: Basic Installation
Chapter 2
USB 3.2 Gen 2 Type-C
®
and DisplayPort configuration
The table below will list the DisplayPort configurations for different scenarios.
DisplayPort IN input to USB 3.2 Gen 2 Type-C
®
port C10 output
(Using a CPU without integrated graphics or a CPU with integrated graphics)
USB 3.2 Gen 2 Type-C
®
port C10 Details
A DP-IN no input -
Not supported
B DP-IN with input V
USB 3.2 Gen 2 Type-C
®
C10 output
standards depend on the external
graphics card.