User’s Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- 2.1 Building your PC system
- 2.1.1 CPU installation
- 2.1.2 Cooling system installation
- 2.1.3 DIMM installation
- 2.1.4 M.2 installation
- 2.1.5 Motherboard installation
- 2.1.6 ATX power connection
- 2.1.7 SATA device connection
- 2.1.8 Front I/O connector
- 2.1.9 Expansion card installation
- 2.1.10 USB 3.2 Gen 2 Type-C® monitor connection
- 2.1.11 M.2 Wi-Fi module and antenna installation
- 2.2 BIOS update utility
- 2.3 Motherboard rear and audio connections
- 2.4 Starting up for the first time
- 2.5 Turning off the computer
- 2.1 Building your PC system
- Chapter 3: BIOS and RAID Support
- Appendix
2-26
Chapter 2: Basic Installation
Chapter 2
2.3 Motherboard rear and audio connections
2.3.1 Rear I/O connection
Rear panel connectors
1. USB 2.0 ports 5 and 12
2. USB 3.2 Gen 2 Type-A port 4
3. Realtek 1Gb Ethernet*
4. Realtek 2.5Gb Ethernet*
5. HDMI
®
port
6. BIOS FlashBack™ button
7. USB 3.2 Gen 2 Type-A port 3
8. USB 3.2 Gen 2 Type-C
®
port C2
9. DisplayPort (input only)
10. USB 3.2 Gen 2 Type-A port 11
11. USB 3.2 Gen 2 Type-C
®
port C10 (shared with DisplayPort graphic output)
12. Optical S/PDIF out port
13. Audio jacks**
* and ** : Refer to the tables on the next page for LAN port LEDs, and audio port definitions.
We strongly recommend that you connect your devices to ports with matching data
transfer rate. For example connecting your USB 3.2 Gen 1 devices to USB 3.2 Gen 1
ports for faster and better performance for your devices.