User Manual
Table Of Contents
- 目錄
- 1. 認識 BIOS 程式
- 2. BIOS 程式設定
- 3. 我的最愛(My Favorites)
- 4. 主選單(Main Menu)
- 5. Ai Tweaker 選單(Ai Tweaker menu)
- 6. 進階選單(Advanced menu)
- 6.1 平台各項設定(Platform Misc Configuration)
- 6.2 CPU 設定(CPU Configuration)
- 6.3 系統代理設定(System Agent Configuration)
- 6.4 PCH 設定(CPU Configuration)
- 6.5 PCH 儲存裝置設定(PCH Storage Configuration)
- 6.6 PCH-FW 設定(PCH-FW Configuration)
- 6.7 Thunderbolt(TM) 設定(Thunderbolt(TM) Configuration)
- 6.8 可信任計算(Trusted Computing)
- 6.9 PCI 子系統設定(PCI Subsystem Settings)
- 6.10 USB 設定(USB Configuration)
- 6.11 網路協定堆疊設定(Network Stack Configuration)
- 6.12 NVMe 設定(NVMe Configuration)
- 6.13 HDD/SSD SMART 資訊(HDD/SSD SMART Information)
- 6.14 APM 設定(APM Configuration)
- 6.15 內建裝置設定(OnBoard Devices Configuration)
- 6.16 Intel(R) 快速儲存技術(Intel(R) Rapid Storage Technology)
- 7. 監控選單(Monitor menu)
- 8. 啟動選單(Boot menu)
- 9. 工具選單(Tool menu)
- 10. 離開 BIOS 程式(Exit menu)
- 11. 更新 BIOS 程式
30
PRIME / ProArt / TUF GAMING Intel 700 系列 BIOS 使用手冊
EARLY DIMM DFE Training
設定值有:[Auto] [Disabled] [Enabled]
Tx Dqs Dcc Training
設定值有:[Auto] [Disabled] [Enabled]
DRAM DCA Training
設定值有:[Auto] [Disabled] [Enabled]
Write Driver Strength Training
設定值有:[Auto] [Disabled] [Enabled]
Rank Margin Tool
設定值有:[Auto] [Disabled] [Enabled]
Memory Test
設定值有:[Auto] [Disabled] [Enabled]
DIMM SPD Alias Test
設定值有:[Auto] [Disabled] [Enabled]
Receive Enable Centering 1D
設定值有:[Auto] [Disabled] [Enabled]
Retrain Margin Check
設定值有:[Auto] [Disabled] [Enabled]
Write Drive Strength Up/Dn independently
設定值有:[Auto] [Disabled] [Enabled]
Margin Check Limit
本項目可以檢視開機記憶體是否需要重設。
設定值有:[Disabled] [L1] [L2] [Both]
以下項目只有當 Margin Check Limit 設定為 [L2] 或 [Both] 時才會出現。
Margin Limit Check L2
L2 check threshold is scale of L1 check.
設定值有:[1] - [300]
Third Timings
tRDRD_sg_Training
設定值有:[Auto] [0] - [127]
tRDRD_sg_Runtime
設定值有:[Auto] [0] - [127]
tRDRD_dg_Training
設定值有:[Auto] [0] - [127]
tRDRD_dg_Runtime
設定值有:[Auto] [0] - [127]
tRDWR_sg
設定值有:[Auto] [0] - [255]
tRDWR_dg
設定值有:[Auto] [0] - [255]