User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thunderbolt(TM) Configuration
- 6.8 Trusted Computing
- 6.9 PCI Subsystem Settings
- 6.10 USB Configuration
- 6.11 Network Stack Configuration
- 6.12 NVMe Configuration
- 6.13 HDD/SSD SMART Information
- 6.14 APM Configuration
- 6.15 Onboard Devices Configuration
- 6.16 Intel(R) Rapid Storage Technology
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
68
PRIME / ProArt / TUF GAMING Intel 700 Series BIOS Manual
6.13 HDD/SSD SMART Information
The items in this menu allow you to view the SMART information for connected storage
devices.
The options displayed in this menu may vary depending on the devices connected to your
motherboard. Please refer to the BIOS of your motherboard for the actual settings and
options.
Restore AC Power Loss
Allows you to set the AC power state to enter when power is re-applied after a power failure.
Configuration options: [Power Off] [Power On] [Last State]
Max Power Saving
Configuration options: [Disabled] [Enabled]
6.14 APM Configuration
The items in this menu allow you to change the advanced power management settings.
NVM Express devices do not support SMART information.