PA247CV Serie LCD-Monitor Benutzerhandbuch
Erste Ausgabe Oktober 2020 Copyright © 2020 ASUSTeK COMPUTER INC. Alle Rechte vorbehalten. Kein Teil dieser Anleitung, inklusive der hierin beschriebenen Produkte und Software, darf ohne ausdrückliche schriftliche Genehmigung der ASUSTeK COMPUTER INC. (“ASUS”) auf irgendeine Weise oder Form reproduziert, übertragen, transkribiert, in Abrufsysteme gespeichert oder in eine andere Sprache übersetzt werden, außer in Form einer im Besitz des Käufers verbleibenden Sicherheitskopie.
Inhaltsverzeichnis Inhaltsverzeichnis........................................................................................ iii Hinweise....................................................................................................... iv TCO zertifiziert............................................................................................. vi Hinweise zu Ihrer Sicherheit...................................................................... vii Pflegen & Reinigen.................................
Hinweise Erklärung der Federal Communications Commission Dieses Gerät erfüllt Teil 15 der FCC-Regularien. Der Betrieb unterliegt den folgenden beiden Voraussetzungen: • Dieses Gerät darf keine Funkstörungen verursachen, und • Dieses Gerät muss jegliche empfangenen Funkstörungen hinnehmen, einschließlich Störungen, die zu unbeabsichtigtem Betrieb führen können. Dieses Gerät wurde getestet und als mit den Grenzwerten für Digitalgeräte der Klasse B gemäß Teil 15 der FCC-Regularien übereinstimmend befunden.
HINWEIS: Energy Star wird unter FreeDOS und Linux-basierten Betriebssystemen nicht unterstützt. Hinweise des Canadian Department of Communications Dieses Digitalgerät überschreitet nicht die Grenzwerte der Klasse B für Funkstörungsemissionen für Digitalgeräte, die in den Radio Interference Regulations des Canadian Department of Communications festgelegt wurden. Dieses Digitalgerät der Klasse B erfüllt die Richtlinien der Canadian ICES-003.
TCO zertifiziert A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded.
Hinweise zu Ihrer Sicherheit • Lesen Sie sorgfältig die mitgelieferte Dokumentation durch, bevor Sie beginnen, den Monitor einzurichten. • Setzen Sie den Monitor weder Regen noch Feuchtigkeit aus, um einen Brand oder elektrischen Schlag zu vermeiden. • Versuchen Sie niemals das Monitorgehäuse zu öffnen. Die gefährliche Hochspannung innerhalb des Monitors kann ernsthafte Verletzungen verursachen. • Falls das Netzteil defekt ist, versuchen Sie es nicht in eigener Regie zu reparieren.
Das Symbol mit einer durchgestrichenen Abfalltonne auf Rädern bedeutet, dass das Produkt (elektrisches und elektronisches Gerät oder quecksilberhaltige Knopfzelle) nicht mit dem Hausmüll zusammen entsorgt werden darf. Bitte schauen Sie nach örtlichen Vorschriften zur Entsorgung elektronischer Geräte. Pflegen & Reinigen • Es ist ratsam, alle Kabel inklusive Stromkabel zu entfernen, bevor Sie den Monitor hochheben oder verstellen.
Weitere Informationen Nutzen Sie die folgenden Quellen, wenn Sie weitere Informationen zum Produkt und zu Software-Aktualisierungen suchen. 1. ASUS-Websites Die weltweiten ASUS-Websites bieten aktuelle Informationen zu Hardware und Software-Produkten von ASUS. Besuchen Sie die Webseite http://www.asus.com 2. Optionale Dokumentation Ihr Produktpaket kann optionale Dokumentation enthalten, die eventuell von Ihrem Händler hinzugefügt wurde. Diese Dokumente gehören nicht zum Standardlieferumfang.
x
1.1 Willkommen! Vielen Dank für den Kauf eines ASUS®-LCD-Monitors! Der aktuellste Breitbild-LCD-Monitor von ASUS bietet ein breiteres, helleres und kristallklares Bild sowie eine Vielzahl weiterer Funktionen, die die Arbeit mit diesem Produkt zum Vergnügen machen. Durch diese Funktionen können Sie die Bequemlichkeit und das wunderbare visuelle Erlebnis des Monitors genießen! 1.
1.3 Einführung zum Monitor 1.3.1 Frontansicht 6 1. 4 3 2 1 Stromschalter/Betriebsanzeige • Mit diese Taste schalten Sie den Bildschirm ein/aus. • Die folgende Tabelle zeigt die Bedeutung der Farben der Betriebsanzeige. 2. Status Beschreibung Weiß Gelb Aus EIN Standby-Modus Aus Menü-Taste: • Drücken Sie auf diese Taste, um das OSD-Menü anzuzeigen, wenn das OSD deaktiviert ist. • Ruft das OSD-Menü auf. • Schaltet die Tastensperre durch 5 Sekunden langes Drücken ein und aus. 3.
4. Eingangsauswahl-Taste: • Drücken Sie auf diese Taste, um das OSD-Menü anzuzeigen, wenn das OSD deaktiviert ist. • Wählt eine verfügbare Eingangsquelle. Drücken Sie die Taste (Eingangsauswahl-Taste) zur Anzeige von HDMI, ) Signal, nachdem Sie das HDMI/DisplayPort/ DisplayPort, USB Typ-C ( USB Typ-C Kabel am Monitor angeschlossen haben. 5. Verknüpfung • Drücken Sie auf diese Taste, um das OSD-Menü anzuzeigen, wenn das OSD deaktiviert ist.
1.3.2 Ansicht von hinten 10 1 2 3 4 5 6 7 8 9 1. Netzschalter. Zum Ein-/Ausschalten der Stromversorgung. 2. Netzstromeingang. Hier schließen Sie das Netzkabel an. 3. Kopfhöreranschluss. Dieser Anschluss steht nur zur Verfügung, wenn ein HDMI-/DisplayPort-Kabel angeschlossen ist. HDMI-Port. Dieser Port dient dem Anschließen eines HDMI-kompatiblen Gerätes. 4. 5. DisplayPort-Eingang. Dieser Port dient dem Anschließen eines DisplayPortkompatiblen Gerätes. 6. USB 3.1 Typ-C.
1.3.4 Andere Funktion(en) 1. Daisy Chaining (für ausgewählte Modelle) Der Monitor unterstützt Daisy-Chain am DisplayPort. Daisy Chaining ermöglicht die Reihenschaltung von bis 4 Monitoren, wobei das Videosignal von der Quelle zu einem Monitor geleitet wird (wenn die Eingangsquelle 1920 x 1080@60Hz beträgt und kein USB-C Gerät angeschlossen ist). Um Daisy Chaining zu ermöglichen, stellen Sie bitte sicher, dass die Quelle überträgt.
1-6 Kapitel 1: Übersicht über das Produkt
2.1 Anbringen des Monitorarms/- fußes So bringen Sie die Monitorbasis an: 1. Legen Sie den Monitor mit dem Bildschirm nach unten zeigend auf einen Tisch. 2. Befestigen Sie den Monitorfuß am Halter; achten Sie darauf, dass die Nase am Halter in der Aussparung am Monitorfuß einrastet. 3. Sichern Sie den Monitorfuß mit Hilfe der mitgelieferten Schraube am Halter. Wir empfehlen Ihnen ein weiches Tuch auf den Tisch zu legen, um Schäden an dem Monitor zu vermeiden. Schraubengröße: M6 x 16,5 mm. 2.
2.3 • Das VESA-Wandmontageset (100 x 100 mm) ist separat erhältlich. • Verwenden Sie nur eine UL-gelistete Wandmontagehalterung mit einer Mindestlast von 22,7 kg (Schraubengröße: M4 x 10 mm) Anpassen des Bildschirms • Schauen Sie bitte auf die volle Fläche des Bildschirms und passen die Position des Bildschirms an, um einen optimalen Blickwinkel zu erhalten. • Halten Sie den Monitorfuß fest, damit der Monitor beim Anpassen des Blickwinkels nicht umkippt.
2.4 Anschließen der Kabel Schließen Sie nach den nachstehenden Anweisungen die Kabel an: • So schließen Sie das Netzkabel an: Verbinden Sie ein Ende des Netzkabels mit dem Netzanschluss des Monitors, das andere Ende verbinden Sie mit einer Steckdose. • So schließen Sie das HDMI/DisplayPort/USB Typ-C* Kabel an: a. Verbinden Sie ein Ende des HDMI/DisplayPort/USB Typ-C* Kabels mit dem HDMI/DisplayPort/USB Typ-C-Anschluss des Monitors. b.
2.5 Einschalten des Monitors Drücken Sie die Ein-/Austaste . Siehe Seite 1-2 für die Position des Stromschalters. Die Betriebsanzeige leucht weiß, wenn der Monitor eingeschaltet ist.
ASUS LCD-Monitor der Serie PA247CV 2-5
2-6 Kapitel 2: Einrichtung
3.1 Bildschirmmenü (OSD-Menü) 3.1.1 Bedienungsvorgang ASUS PA247CV Standardmodus DisplayPort 1920 x 1200@ 60Hz ProArt Preset Standardmodus sRGBmodus Rec. 709 Modus DCI-P3 Modus Landschaftsmodus Lesemodus Dunkelkammer-Modus 1. Drücken Sie eine Taste (außer der Ein/Aus-Taste), um das OSD-Menü anzuzeigen. 2. Drücken Sie auf die 3. Drücken Sie auf die Tasten, die auf dem Bildschirm angezeigt werden, um durch die Funktionen zu steuern.
3.1.2 1. Einführung in die OSD-Funktionen ProArt Preset Diese Funktion enthält 10 Unterfunktionen, die Sie je nach Bedarf auswählen können. Jeder Modus hat eine Option zum Zurücksetzen, damit Sie Ihre Einstellung behalten bzw. zum voreingestellten Modus zurückkehren können. ProArt Preset ASUS PA247CV Standardmodus DisplayPort 1920 x 1200@ 60Hz Standardmodus sRGBmodus Rec.
• Anwendermodus 1/Anwendermodus 2: Ermöglicht Ihnen das Vornehmen von Farbanpassungen in der Erweiterten Einstellung. Die nachstehende Tabelle zeigt die Standardkonfigurationen für jeden ProArt Preset Modus: Funktion Standard- sRGBmodus Modus Farbtemp. Aktivieren (6500K) Helligkeit Kontrast ASCR Schärfe Sättigung FTn ProArt Palette Schwarzwert Gamma 2. Rec.
• Stufe 1~4: Je höher die Stufe, desto weniger blaues Licht wird gestreut. Wenn der Blaulichtfilter aktiviert ist, werden die Standardeinstellungen des Standardmodus automatisch importiert. Zwischen Stufe 1 und Stufe 3, kann die Funktion Helligkeit vom Benutzer konfiguriert werden. Stufe 4 ist die optimierte Einstellung. Sie entspricht der Low Blue Light TÜV-Zertifizierung. Die Helligkeitsfunktion kann nicht vom Benutzer konfiguriert werden.
• Sättigung: Der Einstellbereich reicht hier von 0 bis 100. • FTn: Verändert die Bildfarbe zwischen Grün und Lila. • Farbtemp.: Enthält die 5 Modi 9300K, 6500K, 5500K, 5000K und P3-Theater. P3-Theater ist nur verfügbar, wenn der DCI-P3 Modus ausgewählt ist. • Gamma: Ermöglicht Ihnen die Einstellung des Farbmodus auf 2,6, 2,4, 2,2, 2,0 oder 1,8 (Mac). • Schwarzwert: Zur Einstellung des initialisierten 1. Signalpegels des dunkelsten Grauwertes. • Farbe: • 4. * Einstellung des 6-Achsen-Farbtons.
• Kontrollen: Passt das Seitenverhältnis auf Vollbild, 4:3, 1:1 oder OverScan an. 4:3 ist nur verfügbar, wenn sich die Eingangsquelle im 4:3-Format befindet. Overscan ist nur bei HDMI-Eingangsquellen verfügbar. • Eingangsbereich: Zur Abbildung des Signalbereichs mit dem gesamten schwarz-weiß dargestellten Anzeigebereich. • ASCR: Hier können Sie die Funktion ASCR (ASUS Smart Contrast Ratio) ein-/ausschalten. 5. Klang Über dieses Menü können Sie Lautstärke, Stummschaltung und Quelle anpassen.
7. System-Einstellungen Ermöglicht Ihnen die Anpassung des Systems.
• QuickFit: Ermöglicht eine Vorschau des Dokuments oder des FotoLayouts direkt am Bildschirm, ohne dass Testkopien gedruckt werden müssen. * Alignment: Erleichtern Designern und Benutzern die Organisation von Inhalt und des Layouts auf einer Seite, um ein einheitliches Aussehen und Gefühl zu erhalten. Alignment Grid * B5: Bietet Benutzern die Möglichkeit, ihre Dokumente in Originalgröße auf dem Bildschirm anzuzeigen. B5 * Ruler: Dieses Muster zeigt ein Lineal oben und an der linken Seite.
• Sprache: Sie können aus 21 Sprachen auswählen: Englisch, Französisch, Deutsch, Italienisch, Spanisch, Niederländisch, Portugiesisch, Russisch, Tschechisch, Kroatisch, Polnisch, Rumänisch, Ungarisch, Türkisch, Vereinfachtes Chinesisch, Traditionelles Chinesisch, Japanisch, Koreanisch, Thailändisch, Indonesisch, Persisch. • Information: Hier werden Informationen zu dem Monitor angezeigt. • Fabrikseinst: Die Option “JA” stellt die Standardeinstellungen wieder her. 8.
3.2 Technische Daten Bildschirmtyp Bildschirmgröße TFT-LCD 23,8-Zoll-Breitbild (16:9, 60,47 cm) Max. Auflösung Pixelabstand Helligkeit (i.d.R.) Kontrastverhältnis (i.d.R.) Kontrastverhältnis (max.) Betrachtungswinkel (H/V) CR>10 Anzeigefarben Ansprechzeit ProArt Preset Auswahl Autom. Einstellung Farbtemperaturauswahl Analoger Eingang Digitaleingang 1920 x 1080 0,2745 mm x 0,2745 mm 300 cd/m2 1000:1 100.000.
Mehrsprachige Menünzeige Zubehör Konformität und Normen 21 Sprachen (Englisch, Französisch, Deutsch, Italienisch, Spanisch, Niederländisch, Portugiesisch, Russisch, Tschechisch, Kroatisch, Polnisch, Rumänisch, Ungarisch, Türkisch, Vereinfachtes Chinesisch, Traditionelles Chinesisch, Japanisch, Koreanisch, Thailändisch, Indonesisch, Persisch) Schnellstartanleitung, Garantiekarte, Netzkabel, HDMI Kabel (optional), DisplayPort Kabel (optional), USB C auf A Kabel (optional), USB C auf USB C Kabel (optional),
3.3 Äußere Abmessungen ASUS PA247CV Outline Dimension *Unit: mm(inch) Pivot: +/-90 Degree 90 ° 90 ° 5° Tilt: +35/-5 Degree 35° 460.4 [18.10] 329.9 [12.96] 296.5 [11.65] Active -A rea 148.2 [5.83] 211.4 [8.31] 263.5 [10.36] 539.7 [21.21] 527 [20 .71] Active-Area 262.7 [10.32] ° 343 [13 .48] 58.8 [2.31] 52.8 [2.08] 140.7 [5.53] 11 8 .3 [4.65] 117.4 [4.62] 178.1 [7.00] 295.6 [11.62] 311.8 [12.25] 470.8 [18.50] 90 ° 341.8 [13.43] Swivel: +/-90 Degree 90 304.8 [11.98] 25.1 [0.
3.4 Fehlerbehebung (Häufig gestellte Fragen) Problem Mögliche Lösung Die Betriebs-LED leuchtet nicht • Drücken Sie die Taste , um den Monitor einzuschalten. • Prüfen Sie, ob das Netzkabel richtig mit dem Monitor und der Steckdose verbunden ist. • Prüfen Sie, ob das Gerät eingeschaltet ist. Die Betriebs-LED leuchtet orange, und • Prüfen Sie, ob der Monitor sowie der Computer kein Bild erscheint im normalen Betriebszustand ist.
3.
Timing Name 480p 720p60 576p 720p50 1080p60 1080p50 Pixelformat Horizontale Frequenz (kHz) 720 x 480 1280 x 720 720 x 576 1280 x 720 1920 x 1080 1920 x 1080 ASUS LCD-Monitor der Serie PA247CV 31,469 45 31,25 37,5 67,5 56,25 Vertikale Frequenz (Hz) 60 60 50 50 60 50 Pixelfrequenz (MHz) 27 74,25 27 74,25 148,5 148,5 3-15
3-16 Kapitel 3: Bildschirmmenü (OSD-Menü)