PA248CRV Series LCD Monitor User Guide
First Edition January 2023 Copyright © 2023 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Contents ...................................................................................................... iii Notices ......................................................................................................... iv TCO certified ............................................................................................... vi Safety information ..................................................................................... vii Care & Cleaning ................................
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
NOTE: Energy Star is NOT supported on FreeDOS and Linux-based operating system. Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003. This Class B digital apparatus meets all requirements of the Canadian Interference - Causing Equipment Regulations.
TCO certified A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded.
Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. • If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
AEEE yönetmeliğine uygundur Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. • Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth.
Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com 2. Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.
x
1.1 Welcome! Chapter 1: Product introduction Thank you for purchasing the ASUS® LCD monitor! The latest widescreen LCD monitor from ASUS provides a broader, brighter and crystal-clear display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the monitor brings to you! 1.
1.3 Monitor introduction 1.3.1 Front view 1 1. 3 4 5 6 7 Power button/power indicator • Turns the monitor on/off. Press and hold this button for 0.6 seconds will shut down the monitor. • The color definition of the power indicator is as the below table. 2. Status Description White Amber Off On Standby mode Off QuickFit Plus button: • Press this button to display the OSD menu when the OSD is off. • Selects the QuickFit Plus function. Signal button: 3.
4. Shortcut 2 • Press this button to display the OSD menu when the OSD is off. • Default: Brightness hotkey • To change the hotkey function, go to the Shortcut > Shortcut 2 menu. Shortcut 1 5. • Press this button to display the OSD menu when the OSD is off. • Default: Energy Saving hotkey • To change the hotkey function, go to the Shortcut > Shortcut 1 menu. Exit button: 6. • Press this button to display the OSD menu when the OSD is off. • Exits the OSD menu. Menu (5-way) button: 7.
1.3.2 Back view 96W 96W ＨＤＭＩ－ １ ＨＤＭＩ－ ２ 1 2 3 4 5 6 7 8 9 10 15W 15W 10 11 1. Kensington lock slot. 2. Power switch: Press the switch to turn on/off power. 3. AC-IN port: This port connects the power cord. 4. HDMI-1 port: This port is for connection with an HDMI compatible device. 5. HDMI-2 port: This port is for connection with an HDMI compatible device. 6. DisplayPort in: This port is for connection with a DisplayPort compatible device. 7. USB 3.
1.3.3 Other Function(s) 1. Daisy chaining (for selected models) The monitor supports daisy chain on DisplayPort and USB Type-C. Daisy Chaining allows up to 4 monitors to be connected in series with the video signal being passed from the source to a monitor (when the input source is 1920 x 1200@60Hz and no USB-C device is connected). In order to enable daisy chaining, please make sure the source transported.
Chapter 2: Setup 2.1 Assembling the monitor arm/base To assemble the monitor base: 1. Make sure the triangle marks of VESA cover aligned. 2. Attach the arm into the VESA cover. 3. Shut the lock to make the arm and VESA cover assembled. 4. Have the front of the monitor face down on a table, slide the tabs on the arm into the slots on the VESA cover. 5. Press down the arm assembly to snap it into place. 6.
2.2 Detaching the arm/base (for VESA wall mount) The detachable arm/base of this monitor is specially designed for VESA wall mount. To detach the arm/base: 1. Have the front of the monitor face down on a table. 2. Press the release button, and then detach the arm/base from the monitor (Figure 1). 2 1 We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. 2-2 • The VESA wall mount kit (100 x 100 mm) is purchased separately.
2.3 Adjusting the monitor • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling when you change its angle. • You can adjust the monitor’s angle from +23˚ to -5˚, +/- 30˚ swivel adjustment from either left or right, and it allows +/- 90˚ pivot adjustment. You can also adjust the monitor’s height within +/- 130 mm.
2.4 Connecting the cables Connect the cables as the following instructions: 96W 96W ＨＤＭＩ－ １ ＨＤＭＩ－ ２ 15W 15W • To connect the power cord: Connect one end of the power cord securely to the monitor’s AC input port, the other end to a power outlet. • To connect the HDMI/DisplayPort/USB Type-C* cable: a. Plug one end of the HDMI/DisplayPort/USB Type-C* cable to the monitor’s HDMI/DisplayPort/USB Type-C jack. b.
2.5 Turning on the monitor Press the power button . See page 1-2 for the location of the power button. The power indicator lights up in white to show that the monitor is ON.
3.1 OSD (On-Screen Display) menu 3.1.1 How to reconfigure PA248CRV 1920 x 1200_60Hz Preset Native Mode Signal DisplayPort Brightness 50 Native Mode Preset sRGB Mode Adobe RGB Mode Palette Rec.2020 Mode DCI-P3 Mode Image DICOM Mode Rec.709 Mode QuickFit Plus HDR Signal Back Enter Exit 1. Press any button to display the OSD menu. 2. Press the 3. Menu (5-way) button up/down/left/right to navigate through the Move the functions.
Chapter 3: General 3.1.2 OSD function introduction instructions 1. Preset This function contains 10 sub-functions you can select for your preference. Each mode has the Reset selection, allowing you to maintain your setting or return to the preset mode. PA248CRV 1920 x 1200_60Hz Preset Native Mode Signal DisplayPort Brightness 50 Native Mode Preset sRGB Mode Adobe RGB Mode Palette Rec.2020 Mode DCI-P3 Mode Image DICOM Mode Rec.
Below table shows the default configurations for each ProArt Preset mode: Function Color Temp. Native Mode 6500K Brightness 50 Contrast 80 sRGB Mode Adobe RGB Mode Rec.
2. Palette Set a desired color setting from this menu. Preset Native Mode PA248CRV 1920 x 1200_60Hz Brightness 50 Contrast 80 Saturation 50 Hue 50 Signal DisplayPort Brightness 50 Preset Palette Color Temp. Image Gamma RGB Tuning QuickFit Plus Black Level Signal Back Exit • Brightness: The adjusting range is from 0 to 100. • Contrast: The adjusting range is from 0 to 100. • Saturation: The adjusting range is from 0 to 100. • Hue: Shifts the image color between green and purple.
3. Image Set the image related setting from this menu. Preset Native Mode PA248CRV 1920 x 1200_60Hz Sharpness 0 Trace Free 60 Signal DisplayPort Brightness 50 Preset Aspect Control Palette Input Range Blue Light Filter 0 Image QuickFit Plus Signal Back Enter Exit • Sharpness: The adjusting range is from 0 to 100. • Trace Free: Adjusts the response time of the monitor. • Aspect Control: Adjusts the aspect ratio to Full, Dot to Dot or 1:1 Ratio.
4. QuickFit Plus In this function, you can use different kinds of alignment patterns. PA248CRV 1920 x 1200_60Hz Preset Native Mode Signal DisplayPort Brightness 50 Safe Area Preset Center Marker Customization Palette Ruler Image QuickFit Plus Signal Back 3-6 Enter Exit • Safe Area: Facilitates designers and users to organize content and layout on one page and achieve a consistent look and feel. The selections are: 1:1, Action Safe, Title Safe, 3 x 3.
5. Signal In this function, you can select your desired input source. PA248CRV 1920 x 1200_60Hz Preset Native Mode Signal DisplayPort Brightness 50 HDMI 1 Preset HDMI 2 DisplayPort Palette USB Type-C Auto Detection Image QuickFit Plus Signal Back • Enter Exit Auto Detection: automatically detects other active signals when current input signal is inactive. To activate this function, you need to do the following: remove the connection of Daisy-Chain DisplayPort output (to disable MST output).
6. Settings Allows you to adjust the system. PA248CRV 1920 x 1200_60Hz Preset Native Mode Signal DisplayPort Brightness 50 Media sync Settings Power Saving OSD Setup Shortcut Sound DisplayPort Stream Key Lock Power Indicator Language Back • • Enter Exit MediaSync: Turn on VESA MediaSync support. * MediaSync can only be activated within 48Hz ~ 75Hz. * For supported GPUs, minimum PC system and driver requirements, please contact the GPU manufactures.
• • Sound: * Adjusts Volume from 0 to 100. * Mute or un-Mute the audio output. DisplayPort Stream: Compatibility with graphic card. Select DisplayPort 1.2, DisplayPort 1.4 or DisplayPort 1.4 + USB 3.2 by graphic card DP version. To activate daisy chaining, you need to do the following: set Power Saving to Normal Level. Note: Input port will be fixed (no auto detection) when DP out cable is plugged. • Key Lock: To disable all function keys.
7. Shortcut Defines the functions for Shortcut 1 and 2 buttons. PA248CRV 1920 x 1200_60Hz Preset Native Mode Signal DisplayPort Brightness 50 Shortcut 1 Settings Shortcut 2 Shortcut Back • Enter Exit Shortcut 1/Shortcut 2: Selects a function for Shortcut 1 and 2 buttons. When a certain function is selected or activated, your shortcut key may not support. Available function choices for shortcut: Blue Light Filter, Brightness, Contrast, Color Temp., Volume, Energy Saving, User Mode 1, User Mode 2.
3.2 Specifications summary Panel Type Panel size TFT LCD 24.1” (16:10, 61.13 cm) wide screen Max. Resolution Pixel pitch Brightness (Typ.) Contrast Ratio (Typ.) Viewing angle (H/V) CR>10 Display colors Response time ProArt Preset selection Auto adjustment Color temperature selection Analog input Digital input 1920 x 1200 0.270 mm x 0.270 mm 350 cd/m2 (SDR) 1000:1 178˚/178˚ Digital Output Earphone jack Audio input Speaker (Built-in) USB 3.
Multi-languages Accessories Compliance and Standards 22 languages (English, French, German, Italian, Spanish, Dutch, Portuguese, Russian, Czech, Croatian, Polish, Romanian, Hungarian, Turkish, Simplified Chinese, Traditional Chinese, Japanese, Korean, Thai, Indonesian, Persian, Ukrainian) Quick start guide, warranty card, power cord, HDMI cable (optional), DisplayPort cable (optional), USB C to C cable (optional), color calibration testing report, ProArt welcome card cTUVus, FCC, ICES-3, EPEAT Gold, CB,
Outline dimensions 3.3 ASUS PA248CRV Outline Dimension *Unit: mm(inch) 5° Tilt: -5~23 Degree 23 ° 30 ° [.31] [1.53] Swivel: +/-30 Degree 7.9 38.95 30 ° [1.97] 100 [3.94] M4*4-Depth 10mm 3-13 ASUS PA248CRV Series LCD Monitor [20.93] 50 100 [3.94] [20.41] SCALE 0.200 [12.76] [8.99] [5.12] 130 324 228.35 [7.05] 179.01 [13.70] 348.05 [13.8] 17.5 [14.56] 369.9 518.4 [.69] 531.69 [7.50] 190.37 [20.83] 529.2 350.18 [7.05] 179.
3.4 Troubleshooting (FAQ) Problem Possible Solution Power LED is not ON • Press the button to check if the monitor is in the ON mode. • Check if the power cord is properly connected to the monitor and the power outlet. • Check if the power switch is ON. The power LED lights amber and there is • Check if the monitor and the computer are no screen image in the ON mode. • Make sure the signal cable is properly connected the monitor and the computer.
3.5 Supported operating modes Resolution Frequency Horizontal Vertical Frequency (KHz) Frequency (Hz) Pixel (MHz) 640 x 480 31.47(N) 59.94(N) 25.18 640 x 480 37.87(N) 72.82(N) 31.5 640 x 480 37.5(N) 75.00(N) 31.5 720 x 400 31.47(N) 70.08(P) 28.32 800 x 600 35.16(P) 56.25(P) 36 800 x 600 37.88(P) 60.32(P) 40 800 x 600 46.86(P) 75.00(P) 49.5 832 x 624 49.72(P/N) 74.55(P/N) 57.28 1024 x 768 48.36(N) 60.00(N) 65 1024 x 768 56.476(N) 70.069(N) 75 1024 x 768 60.
When the monitor is operating in the video mode (ie, not displaying data), the following high definition modes shall be supported in addition to standard definition video. Resolution 1920 x 1080p 1920 x 1080i 1440 x 480p 1440 x 576p 1280 x 720p 800 x 600p 720 x 576p 720 x 480p 640 x 480p(VGA) 720(1440) x 576i 720(1440) x 480i 3-16 Vertical Frequency (Hz) 24Hz 25Hz 30Hz 50Hz 59.94Hz 60Hz 50Hz 59.94Hz 60Hz 59.94Hz 60Hz 50Hz 50Hz 59.94Hz 60Hz 60Hz 50Hz 59.94Hz 60Hz 59.94Hz 60Hz 50Hz 59.
