User Guide
Table Of Contents
- Contents
- Notices
- TCO certified
- Safety information
- Care & Cleaning
- Takeback Services
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Adjusting the monitor
- 2.4 Connecting the cables
- 2.5 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
1-4 Chapter 1: Product introduction
8. USB 3.2 Gen 1 Type-A. These ports are for connection with USB devices,
such as USB keyboard/mouse, USB ash drive, etc.
9. Kensington lock slot.
10. USB 3.2 Gen 1 Type-A. These ports are for connection with USB devices,
such as USB keyboard/mouse, USB ash drive, etc.
Port with icon is BC1.2 compliant.
1.3.4 Other Function(s)
1. Daisy chaining (for selected models)
The monitor supports daisy chain on DisplayPort. Daisy Chaining allows up to 4
monitors to be connected in series with the video signal being passed from the
source to a monitor (when the input source is 2560 x 1440@30Hz and no USB-C
device is connected). In order to enable daisy chaining, please make sure the
source transported.
This function is only available when DisplayPort Stream in the OSD menu
is DisplayPort 1.2 and Auto Source Detection is OFF. If you set DisplayPort
Stream to DisplayPort 1.1, all the connected monitor will display the same
content at the same time (clone).
1920x1080@60Hz
2560x1440@30Hz
2560x1440@74.9Hz
1920x1080@60Hz
2560x1440@74.9Hz