User Guide
Table Of Contents
- Contents
- Notices
- TCO certified
- Safety information
- Care & Cleaning
- Takeback Services
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Adjusting the monitor
- 2.4 Connecting the cables
- 2.5 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
3-7ASUS PA278CV Series LCD Monitor
7. System Setup
Allows you to adjust the system.
ASUS ProArt Display PA278CV
Standard Mode DisplayPort 2560 x 1440@ 60Hz
Adaptive-Sync
Power Saving
OSD Setup
QuickFit
DisplayPort Stream
Key Lock
Power Indicator
System Setup
• Adaptive-Sync: Allows an Adaptive-Sync supported* graphics source
to dynamically adjust display refresh rate based on typical content frame
rates for power efcient, virtually stutter free and low-latency display
update.
* Adaptive-Sync can only be activated within 48Hz ~ 75Hz.
* For supported GPUs, minimum PC system and driver requirements, please
contact the GPU manufactures.
To activate this function, you need to do the following: set DisplayPort Stream to
DisplayPort 1.2.
• Power Saving:
* “Normal Level” allows the USB downstream ports/USB Type-C
ports to charge external devices when the monitor enters power
saving mode.
* “Deep Level” does not allow all ports to charge external devices
and keeps USB signal from being automatically detected when
the monitor enters power saving mode.
• OSD Setup:
* Adjusts the OSD timeout from 10 to 120 seconds.
* Enables or disables the DDC/CI function.
* Adjusts the OSD background from opaque to transparent.