User Guide
Table Of Contents
- Contents
- Notices
- TCO certified
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Adjusting the monitor
- 2.4 Connecting the cables
- 2.5 Turning on the monitor
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
3-4 Chapter 3: OSD (On-Screen Display) menu
2. Palette
Set a desired color setting from this menu.
Preset
Native Mode
Signal
DisplayPort
Brightness
50
ExitBack Enter
Image
QuickFit Plus
PIP/PBP
Preset
Palette
50
80
50
50
Brightness
Contrast
Saturation
Hue
Color Temp.
Gamma
RGB Tuning
Black Level
PA279CRV
3840 x 2160_60Hz
• Brightness: The adjusting range is from 0 to 100.
• Contrast: The adjusting range is from 0 to 100.
• Saturation: The adjusting range is from 0 to 100.
• Hue: Shifts the image color between green and purple.
• Color Temp.: Contains 5 modes including 9300K, 6500K, 5500K,
5000K and P3-Theater. P3-Theater is only available for DCI-P3 Mode.
• Gamma: Allows you to set the color mode to 2.6, 2.4, 2.2, 2.0 or 1.8
(Mac).
• RGB Tuning:
* Gain: The adjusting range is from 0 to 100.
* Offset: The adjusting range is from 0 to 100.
• Black Level: To adjust the initialized 1st signal level of darkest gray
level.
* Signal: The adjusting range is from 0 to 100.
* Backlight: To adjust darkness of backlight.
• Color Reset:
* Current mode color reset:
Resets the color settings of current color mode to the factory
default value.
* All modes color reset:
Resets the color settings of all color modes to the factory default
value.