User Guide
Table Of Contents
- Contents
- Notices
- TCO certified
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Adjusting the monitor
- 2.4 Connecting the cables
- 2.5 Turning on the monitor
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
3-7ASUS PA279CRV Series LCD Monitor
5. QuickFit Plus
In this function, you can use different kinds of alignment patterns.
To activate this function, you need to do the following: turn off PIP/PBP,
disable HDR on your device and restore your screen back to normal
position (do not rotate).
Preset
Native Mode
Signal
DisplayPort
Brightness
50
ExitBack Enter
Preset
Palette
Image
PIP/PBP
QuickFit Plus
Safe Area
Center Marker
Mirror Mode
Customization
Ruler
PA279CRV
3840 x 2160_60Hz
• Safe Area: Facilitates designers and users to organize content and
layout on one page and achieve a consistent look and feel. The selections
are: 1:1, Action Safe, Title Safe, 3 x 3.
• Center Marker: Adjusts the Type 1, Type 2, Type 3.
• Mirror Mode: Flip the image horizontally.
• Customization: You can decide the frame size by moving the
Menu (5-way) button up/down/left/right. You can press the Menu
(5-way) button for longer than 3 seconds to switch the measurements
between millimeter and inch.
• Ruler: This pattern presents physical ruler on top and left side. You can
press the
Menu (5-way) button for longer than 3 seconds to switch the
measurements between metric and imperial.